We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black charger unit with red and black alligator clip leads attached

BatteryJack inc.

BatteryJack inc. Banshee LiFePO4 Charger 14.6V 1.5A Alligator Clips

SKU CH-GENZ-H91AF

Charges and maintains 12.8 V LiFePO4 packs from 3 to 30 Ah with 14.6 V 1.5 A output and alligator clips

  • Battery TypeLi-ion
  • Charges 12.8 V LiFePO4 packs from 3 to 30 Ah
  • Fully automatic with overcharge, short-circuit and reverse-polarity protection
  • 100–240 V 50/60 Hz input for worldwide use
  • 6 V 1.5 A output with red/green charge-status indicator
  • Alligator-clip connector for quick, secure battery attachment

14.6 V 1.5 A LiFePO4 charger

The BatteryJack Banshee is a fully automatic charger for 12.8 volt lithium iron phosphate batteries between 3 and 30 Ah. It connects with dual alligator clips and suits motorcycles, portable packs and other 12 V LiFePO4 systems with a built-in BMS.

100–240 V AC input range

The unit accepts 100 to 240 V AC at 50 or 60 Hz, so it works on mains supplies worldwide without a voltage selector. Output is fixed at 14.6 V DC and 1.5 A; the charger stops at full charge and protects against short circuits and reverse polarity.

3–30 Ah capacity window

Batteries from 3 Ah to 30 Ah charge comfortably within the 1.5 A rate; larger packs will take proportionally longer and very small cells below 3 Ah are outside the design window. The red-to-green indicator shows charge status, and the charger should be disconnected once the green light appears.

Highlights

  • Charges 12.8 V LiFePO4 packs from 3 to 30 Ah
  • Fully automatic with overcharge, short-circuit and reverse-polarity protection
  • 100–240 V 50/60 Hz input for worldwide use
  • 6 V 1.5 A output with red/green charge-status indicator
  • Alligator-clip connector for quick, secure battery attachment

Specifications

Battery TypeLi-ion

Questions about this item

Should I choose the 1.5 A or the 3 A version for my 12.8 V LiFePO4 pack?

The charger supplied here delivers 1.5 A at 14.6 V; the 3 A figure appears in the supplier title only and does not match the actual output specification.

What does the 14.6 V output mean when the charger is connected to a 12.8 V battery?

14.6 V is the absorption voltage for a 4-cell LiFePO4 pack; the charger holds this level until the battery reaches full charge, then the indicator turns green.

What does the 100-240 V 50/60 Hz input cap in practice?

It allows the unit to run on any mains supply worldwide without a voltage selector, but the output remains limited to 1.5 A at 14.6 V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.