We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black charger with dual alligator clips and indicator light

BatteryJack inc.

BatteryJack inc. Banshee 14.4V 3A LiFePO4 Charger Maintainer

SKU CH-XMPC-QRP6D

Charges and maintains 12.8 V LiFePO4 packs from 3 to 30 Ah with 14.4 V 3 A output and built-in short-circuit and reverse-polarity protection

  • Battery TypeLi-ion
  • Charges 12.8V LiFePO4 packs up to 30Ah
  • Automatic 3A output stops at full charge
  • 100-240V input works worldwide
  • CE and UL safety approvals included
  • Red and green LEDs show charge status

Purpose & Fit

The BatteryJack inc. Banshee charger maintains 12.8 volt LiFePO4 packs rated from 3 to 30 Ah. It suits motorcycles and similar equipment that use four-cell lithium iron phosphate batteries with an integrated BMS. The unit is not for sealed lead-acid or other chemistries, so owners of those battery types must choose a different charger.

Thermals, Noise & Power

The charger accepts 100 to 240 volt AC at 50 or 60 Hz and delivers a 14.4 volt, 3 amp output for the main charging cycle. A secondary 14.6 volt, 1.5 amp output is also provided through the alligator-clip connector. Built-in protection guards against short circuits and reverse polarity during operation.

Accessories & Software Impact

Dual alligator clips with red-positive and black-negative leads connect directly to the battery terminals. An indicator lamp shows red while charging and turns green when the pack reaches full charge, prompting the user to disconnect the unit. No software or additional accessories are included.

Highlights

  • Charges 12.8V LiFePO4 packs up to 30Ah
  • Automatic 3A output stops at full charge
  • 100-240V input works worldwide
  • CE and UL safety approvals included
  • Red and green LEDs show charge status

Specifications

Battery TypeLi-ion

Questions about this item

How do I connect the alligator clips to my 12.8 V LiFePO4 pack without triggering reverse-polarity protection?

Attach the red clip to the positive terminal and the black clip to the negative terminal; the charger's built-in reverse-polarity circuit will block output if the clips are swapped.

What ongoing care does the Banshee charger itself require after repeated use?

No scheduled maintenance is needed; keep the vents clear, inspect the clip insulation for cracks, and store the unit in a dry place between charge cycles.

At what point does the charger stop delivering its full 3 A during a long session?

The charger tapers current as the pack approaches 14.4 V; once the green LED lights, the battery is full and output drops to near zero.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.