We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

BatteryJack inc.

BatteryJack inc. 12V Car Motorcycle Battery Charger 2-90Ah LCD

SKU CH-243Q-3R9ZR

Charges 12-volt lead-acid batteries from 2 to 90 Ah with automatic LCD monitoring and full protection

  • Charges 2–90 Ah lead-acid batteries
  • LCD display shows charge status clearly
  • Automatic operation with full safety protection
  • Works with 6 V and 12 V systems
  • Includes interchangeable clamps and ring terminals

12V Automatic Charger for Lead-Acid Batteries

The BatteryJack inc. 12V charger handles sealed lead-acid batteries from 2 to 90Ah including AGM, GEL and VRLA types. It accepts 120V 60Hz mains input and delivers selectable 6V or 12V DC output up to 3.8A. An LCD display shows status while automatic protection guards against reverse polarity, over-charge, short-circuit, over-temperature and high or low voltage conditions.

Plug-In Operation with Swappable Leads

Connect the unit to mains power, choose the included alligator clips or ring terminals, then pick the motorcycle, car or snowmobile preset on the LCD menu. The charger then manages the cycle without further input. The only common issue is selecting the wrong voltage preset for the fitted battery, which the protection circuitry will flag but which still delays the charge.

3.8A Maximum Current Limits Large-Bank Charging

The 3.8A peak current means a fully discharged 90Ah battery will require many hours to reach full state of charge. The charger is designed for maintenance and overnight top-ups rather than rapid recovery of deeply depleted banks. It does not support lithium chemistries or voltages beyond the 14.4V and 14.7V maximums stated for lead-acid modes.

Highlights

  • Charges 2–90 Ah lead-acid batteries
  • LCD display shows charge status clearly
  • Automatic operation with full safety protection
  • Works with 6 V and 12 V systems
  • Includes interchangeable clamps and ring terminals

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the charger is operating correctly after connecting it?

The LCD display shows the charging progress and the LED indicators confirm proper connection or alert to reverse polarity, over-charge, short-circuit, over-temperature and voltage faults.

What accessories are included and what must be purchased separately?

The unit comes with detachable alligator clips and ring terminals for battery connection; no other cables or accessories are mentioned in the specifications.

Which setting should I choose for a 12V 60Ah AGM car battery?

Select the 12V output and the Car mode on the charger; it supports Lead-acid AGM batteries from 2 to 90Ah with a maximum charging current of 3.8A.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.