BatteryJack inc.
BatteryJack inc. 12V 7Ah Sealed Lead Acid Battery F1 Terminals
A 12 V sealed lead-acid battery with AGM technology, F1 terminals and maintenance-free operation
- Ready to install as a 100% OEM replacement
- Sealed AGM construction prevents electrolyte leakage in any position
- Maintenance-free design requires no water checks or specific gravity readings
- Gas recombination recovers over 90% of generated gas during normal use
- F1 terminals sized at .187in for direct compatibility
Purpose and fit
This 12 V sealed lead-acid battery uses AGM technology and F1 terminals rated at .187 in. It suits UPS units, alarm panels, emergency lighting and other standby power systems that require a direct 7 Ah replacement.
Installation and pitfalls
The maintenance-free, non-spillable design allows mounting in any orientation without adding electrolyte. Verify that the device accepts F1 terminals and the exact physical envelope before fitting; forcing an undersized compartment or mismatched connector is the common cause of returns.
Deciding specification
Capacity is 7 Ah at 12 V, and the gas recombination rate exceeds 90 % during normal float service. If the application demands a different amp-hour rating or terminal style, this unit will not meet the requirement.
Highlights
- Ready to install as a 100% OEM replacement
- Sealed AGM construction prevents electrolyte leakage in any position
- Maintenance-free design requires no water checks or specific gravity readings
- Gas recombination recovers over 90% of generated gas during normal use
- F1 terminals sized at .187in for direct compatibility
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the 12 V 7 Ah battery is working after installation?
Check that the UPS or device powers on and runs its self-test without fault codes, and confirm the battery holds voltage under load during a runtime test.
What comes in the box and what must I source separately?
The sealed lead-acid battery with F1 (.187in) terminals is supplied; cables, mounting hardware and any connector adapters are not included.
Which version should I choose for a standard UPS replacement?
Select the 12 V 7 Ah AGM model with F1 terminals to match the original specifications of most UPS and backup devices.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
