BatteryJack inc.
BatteryJack inc. 12V 1.3AH standard battery CASIL CA1212 TEMPEST TR1.3-12
12V 1.3AH AGM sealed battery replaces CASIL CA1212 and TEMPEST TR1.3-12 with 90% gas recombination and maintenance-free operation
- Reliable power from advanced AGM technology
- Spill-proof sealed construction for safe use in any position
- Maintenance-free operation with no water or checks needed
- 100% OEM replacement fits CASIL CA1212 and TEMPEST TR1.3-12
- Over 90% gas recombination extends service life
12 V 1.3 Ah AGM battery
This 12 volt 1.3 ampere-hour sealed lead-acid battery uses absorptive glass mat technology for maintenance-free operation. It serves as a direct OEM replacement in UPS units, alarm panels and backup power systems. The non-spillable design meets IATA requirements for safe transport in any orientation.
Fits standard 12 V battery compartments
The unit drops into existing 12 volt housings without modification and requires no watering or electrolyte checks during its service life. Its sealed construction eliminates leakage risk, freeing installers from containment trays or ventilation provisions. Gas recombination handles over 90 percent of internally generated gas under normal float conditions.
Delivers 1.3 Ah at 12 V
The capacity supports typical standby loads such as security keypads, emergency lighting and small UPS modules for the expected 4 to 7 year design life. Runtime decreases under heavy discharge rates or elevated temperatures, and the battery is not suited for cyclic deep-discharge applications. Capacity falls below useful levels once the design life is exceeded.
Highlights
- Reliable power from advanced AGM technology
- Spill-proof sealed construction for safe use in any position
- Maintenance-free operation with no water or checks needed
- 100% OEM replacement fits CASIL CA1212 and TEMPEST TR1.3-12
- Over 90% gas recombination extends service life
Specifications
No published specifications for this item yet.
Questions about this item
How long can this 1.3 Ah battery sustain a load before voltage drops?
The 1.3 Ah rating means it can deliver 1.3 amps for one hour or proportionally less current for longer periods; actual runtime depends on the discharge rate and cut-off voltage of your device.
Does this sealed AGM unit generate noticeable heat or noise during continuous float charging?
The maintenance-free AGM design recombines over 90% of generated gas internally, so it operates silently with minimal heat rise under normal float conditions.
What connectors or cables are required to install this 12 V battery in my UPS?
It uses standard F1/F2 faston terminals; you will need matching push-on connectors or a wire harness with the same terminal size to complete the installation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



