We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular 12V 1.3Ah AGM battery in black ABS case with T1 terminals

BatteryJack inc.

BatteryJack inc. 12V 1.3Ah dry cell battery

SKU CH-PE17-BR81E

A sealed, maintenance-free 12 V 1.3 Ah AGM battery for UPS, alarm and emergency-lighting backup

  • Maintenance-free AGM design eliminates spill risk
  • Valve-regulated construction allows operation from any angle
  • 3 Ah capacity at 20-hour rate powers UPS and alarms
  • ABS case withstands high impact without damage
  • Low-pressure safety valve prevents pressure build-up

Purpose & Fit

This 12 V 1.3 Ah dry cell battery uses AGM technology for sealed, maintenance-free operation. It serves as a direct OEM replacement in uninterruptible power supplies, emergency lighting, alarm panels and similar backup systems. The valve-regulated design prevents spills and allows mounting at any angle. Buyers needing higher capacity or longer runtime should select a larger model.

Thermals, Noise & Power

The sealed AGM construction produces no audible noise and emits no gas during normal float charging. Internal resistance stays low across the 4–7 year expected service life, so self-heating remains minimal in standby use. No active cooling or ventilation is required beyond normal enclosure airflow. The low-pressure safety valve only activates under extreme overcharge conditions.

Deciding Spec

Nominal capacity is 1.3 Ah at the 20-hour rate, delivering 12 V for compatible backup equipment. Physical dimensions are 97 mm length, 43 mm width and 52 mm container height, with a total height of 58 mm including the T1 terminal. Weight is approximately 0.57 kg. Verify these measurements and the T1 terminal type against your device before ordering.

Highlights

  • Maintenance-free AGM design eliminates spill risk
  • Valve-regulated construction allows operation from any angle
  • 3 Ah capacity at 20-hour rate powers UPS and alarms
  • ABS case withstands high impact without damage
  • Low-pressure safety valve prevents pressure build-up

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the 12V 1.3Ah dry cell battery and which terminal orientation is required?

Insert the battery with the T1 terminals facing the correct polarity marks inside the device; the sealed AGM design allows any mounting angle without spillage.

What maintenance or replacement will the 12V 1.3Ah battery need over its service life?

The valve-regulated AGM construction is maintenance-free; plan replacement after the expected 4-7 year life when capacity drops below usable levels.

What limit appears first when the 12V 1.3Ah battery runs under sustained load?

The 1.3Ah nominal capacity at the 20-hour rate defines the runtime ceiling; voltage will fall once that ampere-hour reserve is exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.