We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black sealed lead-acid battery with two terminals

Battery Technology Inc.

Battery Technology Inc. RBC46-SLA46-BTI accessory

SKU CH-R2FZ-42FZG MPN RBC46-SLA46-BTI

12 V 5.5 Ah sealed lead-acid replacement battery for APC BE500 UPS units

  • TypeBattery
  • CompatibilityAPC BE500 Replace oem number(s): RBC46
  • SpecificationsVolts: 12V Cells: 1 Amps: 5.5A Chemistry: Sealed Lead Acid
  • Powers APC BE500 UPS with 12V 5.5A sealed lead-acid chemistry
  • Direct replacement for OEM RBC46 restores original runtime
  • Single-cell 12V design fits existing battery compartment
  • 5 amp-hour capacity supports essential load during outages
  • New BTI unit manufactured to APC BE500 specifications

Compatible APC BE500 Replacement

The Battery Technology Inc. RBC46-SLA46-BTI is a direct replacement battery for the APC BE500 uninterruptible power supply. It restores backup runtime when the original cell reaches end of life. Home-office users and small-business operators can swap the module without tools or firmware changes.

Sealed Lead Acid 12V 5.5A Operation

The unit uses a single sealed lead acid cell rated at 12 volts and 5.5 ampere-hours. This chemistry delivers stable voltage during discharge and requires no maintenance. Normal operation produces minimal heat and no audible fan noise because the battery itself is passive.

Replaces OEM RBC46 Module

This accessory replaces the APC RBC46 original equipment module listed in the compatibility data. The upgrade is worth it when the UPS reports a battery fault, runtime drops below useful levels, or the unit reaches its typical service interval. Buyers needing higher capacity or lithium chemistry should look elsewhere.

Highlights

  • Powers APC BE500 UPS with 12V 5.5A sealed lead-acid chemistry
  • Direct replacement for OEM RBC46 restores original runtime
  • Single-cell 12V design fits existing battery compartment
  • 5 amp-hour capacity supports essential load during outages
  • New BTI unit manufactured to APC BE500 specifications

Specifications

BrandBTI
ModelRBC46-SLA46-BTI
TypeBattery
CompatibilityAPC BE500
Replace oem number(s): RBC46
SpecificationsVolts: 12V
Cells: 1
Amps: 5.5A
Chemistry: Sealed Lead Acid
Shipping weight2.27 kg
Package size210 × 168 × 73 mm

Questions about this item

How do I install the RBC46-SLA46-BTI in my APC BE500 without damaging the connector?

Power off the UPS, remove the battery cover, disconnect the old battery leads noting polarity, connect the new 12V 5.5A pack matching red to positive and black to negative, then refit the cover securely.

When will the sealed lead-acid cell in this RBC46 replacement need changing again?

Expect three to five years of service; replace once runtime drops noticeably or the UPS reports a battery fault during self-test.

What runtime limit appears first during a prolonged outage with this 5.5Ah pack?

The 12V 5.5Ah capacity determines how long the BE500 can sustain its load; once depleted the UPS will shut down until mains power returns.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.