Batianda
Batianda Trackpad Replacement for MacBook Air A2179 (Silver) 2 in 1 accessory
Replacement trackpad with cable and tool kit restores Force Touch control on 2020 MacBook Air 13.3 A2179 models
- Restores precise Force Touch control on MacBook Air A2179 2020 models
- Includes trackpad, flex cable and six-piece tool kit for self-installation
- Fits 13.3-inch Core i3, i5 and i7 variants with EMC 3302
- Silver finish matches original MacBook Air A2179 colour scheme
- Replaces worn or cracked trackpad to regain accurate cursor response
Exact Model Fit
This trackpad replacement kit is built for the MacBook Air 13.3 A2179 (EMC 3302) 2020 models with Core i3, i5 or i7 processors. It is not for the M1 A2337 or any other year or screen size.
Single Deciding Spec
The part matches Apple order numbers MWTJ2LL/A, MWTK2LL/A, MWTL2LL/A, MVH22LL/A, MVH42LL/A and MVH52LL/A and carries APN 661-15393. If your serial lookup shows a different part number this kit will not work.
Install Reality
The box includes the trackpad, flex cable and a six-piece driver set with P5, T5 and T3 bits plus opening picks. The IPD connector cowling is fragile; rushing the T3 screws often cracks it, so work slowly and keep the anti-static bar handy.
Highlights
- Restores precise Force Touch control on MacBook Air A2179 2020 models
- Includes trackpad, flex cable and six-piece tool kit for self-installation
- Fits 13.3-inch Core i3, i5 and i7 variants with EMC 3302
- Silver finish matches original MacBook Air A2179 colour scheme
- Replaces worn or cracked trackpad to regain accurate cursor response
Specifications
No published specifications for this item yet.
Questions about this item
Does the Force Touch trackpad restore the same pressure-sensitive click on my A2179 MacBook Air?
Yes, this replacement brings back the original Force Touch sensitivity so the trackpad registers light taps and deeper presses exactly as the factory part did on the 2020 13.3-inch model.
What connector does the flex cable use to link the trackpad to the logic board?
The included flex cable plugs directly into the IPD connector on the logic board, matching the original Apple 661-15393 interface for the A2179 (EMC 3302) series.
Which screws must I remove to swap the trackpad, and are the drivers in the box?
You need a P5 pentalobe for the bottom case, a T5 torx for the trackpad mount screws and a T3 torx for the IPD connector cowling — all three drivers are supplied in the tool kit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



