We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black IEC C14 male plug splitting to four C13 female sockets on 1.8 metre cable

Batianda

Batianda C14 to 4x C13 Splitter Power Cord 1.8M

SKU CH-HFRT-ADTY7

Splits one C14 inlet into four C13 outlets for servers, UPS units, PDUs and workstations up to 1000 W, 1.8 m long with 10 A copper conductors

  • Connects one C14 inlet to four C13 outlets for dense rack power
  • 8 m length suits standard cabinet spacing without excess slack
  • Pure copper conductors keep resistance low and heat minimal
  • Rated 10 A at 250 V for loads up to 1000 W
  • Built-in on/off switch cuts power without unplugging devices

C14 to Four C13 Splitter Cord

This 1.8-metre power cord splits a single IEC 320 C14 inlet into four C13 outlets, letting one UPS or PDU feed up to four devices. It suits server racks, networking gear, workstations and home-office equipment that all use standard C14 inputs.

10 A Rating with On-Off Switch

The H05VV-F 3×0.75 mm² pure-copper cable carries 10 A at 125–250 V and includes an integrated 10 A on-off switch for local power control. The flame-retardant PVC jacket is rated from -30 °C to 60 °C, keeping heat rise low during continuous loads under 1000 W.

Frees PDU Ports for Dense Racks

One C14 plug occupies a single outlet on your power strip or UPS while providing four C13 sockets for servers, monitors, projectors or other kit. Builders needing more than four branches or a higher amperage feed will need an additional distribution unit.

Highlights

  • Connects one C14 inlet to four C13 outlets for dense rack power
  • 8 m length suits standard cabinet spacing without excess slack
  • Pure copper conductors keep resistance low and heat minimal
  • Rated 10 A at 250 V for loads up to 1000 W
  • Built-in on/off switch cuts power without unplugging devices

Specifications

No published specifications for this item yet.

Questions about this item

How do I plug the C14 male end into a UPS or PDU and the four C13 females into my gear without overloading the 10 A rating?

Insert the C14 plug fully into the UPS or PDU outlet, then connect each device to a C13 socket; keep total draw under 10 A at 250 V so the 1.8 m H05VV-F 3×0.75 mm² cable and built-in switch stay within rating.

What maintenance or replacement will this splitter cord need over time?

Inspect the PVC jacket and copper cores periodically for heat damage or cracking; replace the cord if the on/off switch feels loose, the connectors grip poorly, or the insulation shows discoloration from sustained 10 A loads.

What limit appears first when the cord runs near its 10 A capacity for long periods?

The 0.75 mm² conductors and 10 A switch become the bottleneck, causing measurable voltage drop and connector heating before the 250 V insulation rating is ever reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.