Batianda
Batianda 90W/65W AC Adapter 19.5V 4.62A 7.45mm+4.53mm Non-USB-C
19.5 V 4.62 A power supply covers 65 W and 90 W Dell laptops and OptiPlex Micro desktops with swappable 7.45 mm and 4.53 mm tips
- Delivers 19.5V 4.62A for stable 90W or 65W charging
- Includes 7.45mm barrel plus 4.53mm adapter for wide Dell fit
- Multi-protect guards against over-voltage, over-current, over-temp and short-circuit
- Compatible with Latitude, Inspiron, OptiPlex Micro and Precision models listed
- Efficient conversion keeps adapter cooler during long work sessions
Non-USB-C Dell power adapter
This 19.5V 4.62A AC adapter supplies up to 90W through a 7.45mm barrel connector. A 4.53mm tip adapter is included so the same cable fits both large and small Dell power ports. It replaces original chargers rated at 65W or 90W for a wide range of Latitude, Inspiron, OptiPlex Micro, Studio XPS and Precision models. The unit is new and includes multi-protection circuitry for over-voltage, over-current, over-temperature and short-circuit safety.
Suits 65W and 90W Dell systems only
Buyers whose Dell laptop or micro desktop shows 19.5V 3.34A, 19.5V 4.62A, 65W or 90W on the original label can use this adapter. Systems that require a 130W power supply will not operate correctly with this unit. The connector is a traditional barrel type, so any device that charges exclusively through USB-C is not compatible. No other voltage or wattage configurations are supported by this model.
Check label voltage and connector before ordering
Verify that the original charger reads 19.5V with either 3.34A or 4.62A output and that the required tip is either 7.45mm or 4.53mm. Confirm the device is listed among the compatible Latitude, Inspiron, OptiPlex Micro, Studio XPS or Precision series shown in the specifications. Do not purchase if the service tag or power label indicates a 130W requirement.
Highlights
- Delivers 19.5V 4.62A for stable 90W or 65W charging
- Includes 7.45mm barrel plus 4.53mm adapter for wide Dell fit
- Multi-protect guards against over-voltage, over-current, over-temp and short-circuit
- Compatible with Latitude, Inspiron, OptiPlex Micro and Precision models listed
- Efficient conversion keeps adapter cooler during long work sessions
Specifications
No published specifications for this item yet.
Questions about this item
Does the adapter include both the 7.45 mm barrel tip and the 4.53 mm tip for my Dell?
Yes, the DC cable ends in a 7.45 mm barrel and a 4.53 mm adapter is included in the box so you can swap tips to match your Dell.
Will this 90W unit safely run on my OptiPlex Micro 7040 that originally used a 65W supply?
The adapter supports both 65W and 90W Dell configurations and is listed for the OptiPlex Micro 7040, so it will work with your 65W system.
How can I confirm the charger is delivering the correct 19.5 V output after I connect it?
The multi-protect circuitry regulates voltage and current; a steady charge LED on your Dell and no overheating indicate the 19.5 V output is working as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
