Batianda
Batianda 2 in 1 Accessory 58mm Thermal Receipt Printer 70mm/s USB-B
Direct thermal receipt printer with 70 mm/s speed, 48 mm print width and 203 dpi resolution via USB-B
- Fast 70mm/s printing speeds up receipt output
- 203dpi resolution delivers sharp 48mm-wide text and graphics
- Thermal technology prints without ink or toner cartridges
- Print head rated for 31 miles of reliable service
- USB-B plug connects directly to compatible money counters
58 mm Direct Thermal Receipt Printer
The Batianda DT40P is a direct thermal receipt printer that uses 58 mm wide paper and prints at 70 mm/s with a 203 dpi resolution. It connects through a USB-B port and requires no ink or ribbon. The compact unit measures 7.3 x 5.1 x 4.4 inches and includes a manual cutter for separating receipts.
Upgrade from ink-based or slower thermal units
This printer replaces older dot-matrix or ink-based receipt printers that need consumables and regular maintenance. The jump is worth it when you need a quieter, faster 70 mm/s output with a print head rated for 31 miles of use. It also suits users moving from narrower paper formats to the standard 57 mm roll width with a maximum 50 mm outer diameter.
Sustained thermal printing performance
Under continuous operation the direct thermal mechanism maintains consistent 203 dpi quality without the degradation seen in ribbon-based systems during long runs. The manual cutter handles repeated use without motor wear, and the simple paper loading reduces downtime between high-volume shifts. The USB-B link provides a stable wired connection for extended printing sessions.
Highlights
- Fast 70mm/s printing speeds up receipt output
- 203dpi resolution delivers sharp 48mm-wide text and graphics
- Thermal technology prints without ink or toner cartridges
- Print head rated for 31 miles of reliable service
- USB-B plug connects directly to compatible money counters
Specifications
No published specifications for this item yet.
Questions about this item
Will the 7.3 x 5.1 x 4.4 inch footprint fit on my counter?
The printer measures 7.3 inches wide, 5.1 inches deep and 4.4 inches high, so check that your counter space clears those dimensions.
Which way does the 57 mm thermal roll feed into the mechanism?
Open the cover, drop the roll so paper feeds from the bottom, pull a short length through, then close the cover until it clicks.
When should I plan to replace the print head rated for 31 miles?
The head is rated for 31 miles of printing; replace it when output fades or becomes uneven after cleaning.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



