Batianda
Batianda 1706 65W Surface charger 2 in 1 accessory
A 65W Surface power adapter with an extra USB port to charge a phone at the same time, compatible with Surface Pro 3 through 9 and Surface Book models
- Charges Surface Pro 3 through 9 and X at 65W
- 10 ft cable reaches distant outlets easily
- Extra USB port powers phone at 5W simultaneously
- Automatic thermal and short-circuit protection keeps devices safe
- Works with 24W, 36W, 44W and 65W Surface models
65W power adapter with USB port
This 65 watt charger supplies 15 volts at 4 amps to compatible Surface devices and includes an extra USB port that delivers 5 volts at 1 amp for a phone or accessory. It accepts 100 to 240 volts at 50 or 60 hertz so it works worldwide. A ten foot cord is included in the box. Built-in thermal overload and short circuit protection shut the unit down if a fault occurs.
For Surface Pro 3 through 9 X and Surface Book
The adapter matches Microsoft model numbers 1706, 1866, 1796, 1724, 1625, 1867, 1735 and 1800 and also supports 44 watt, 36 watt and 24 watt units. Buyers whose device requires a higher wattage or a different connector should look at another power supply. The single USB port provides only 5 watts so it will not fast charge modern phones or power hungry tablets.
65W output at 15V 4A
This is the decisive specification: the charger must deliver exactly 15 volts at 4 amps for 65 watts total. If the target Surface model needs a different voltage or a higher current this unit will not work.
Highlights
- Charges Surface Pro 3 through 9 and X at 65W
- 10 ft cable reaches distant outlets easily
- Extra USB port powers phone at 5W simultaneously
- Automatic thermal and short-circuit protection keeps devices safe
- Works with 24W, 36W, 44W and 65W Surface models
Specifications
No published specifications for this item yet.
Questions about this item
Does the 10 ft cord reach a distant wall socket?
Yes, the included power supply cord is 10 ft long, giving plenty of reach from a floor outlet to a desk.
How do I connect the charger so the magnetic tip seats correctly on my Surface Pro 7?
Align the magnetic connector with the charging port on the device; it snaps into place automatically — do not force it.
When should I replace the power cord if the insulation starts to crack?
Replace the cord immediately once you see any exposed wire or damaged insulation to maintain the built-in overload and short-circuit protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



