We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A 15.6 inch matte LCD panel with a 30 pin eDP connector

Batianda

Batianda 15.6" 1366x768 eDP 30-pin Matte LCD Screen 2 in 1 accessory

SKU CH-72AR-2VQ60

A 15.6 inch 1366x768 eDP 30-pin matte LCD replacement screen for 2-in-1 laptops

  • 6 inch diagonal fits compatible 2-in-1 laptops
  • 1366 by 768 WXGA resolution restores original clarity
  • eDP 30-pin connector matches factory interface
  • Matte surface reduces glare in bright light
  • Non-touch panel keeps weight and cost low

15.6" eDP 30-pin Matte Replacement Screen

This new Batianda LCD panel is a non-touch 15.6 inch display with a 1366 by 768 WXGA resolution. It uses a 30-pin eDP connector and features a matte surface treatment. The screen is designed as a direct replacement for compatible 2-in-1 laptops requiring these exact specifications.

Package Contains Panel Only

The bundle includes the brand new LCD screen and nothing else. No control board, bezel, back cover, instructions or tools are supplied. You must retain and reuse all original mounting hardware and cables from your current assembly to complete the installation.

Verify Specifications Before Ordering

You must confirm your existing screen matches the 1366 by 768 resolution, eDP 30-pin interface, matte finish and non-touch configuration. A mismatch in any of these specifications will prevent the panel from working. Disconnect the laptop power and battery before beginning the installation to avoid electrical damage.

Highlights

  • 6 inch diagonal fits compatible 2-in-1 laptops
  • 1366 by 768 WXGA resolution restores original clarity
  • eDP 30-pin connector matches factory interface
  • Matte surface reduces glare in bright light
  • Non-touch panel keeps weight and cost low

Specifications

No published specifications for this item yet.

Questions about this item

Will the eDP 30-pin connector or the backlight need replacement after a few years of daily use?

The panel uses a standard eDP 30-pin interface and LED backlight; the connector is rated for the life of the screen and the backlight is not user-replaceable.

What is the first limitation that appears when the 15.6 inch 1366×768 panel runs continuously at full brightness?

Sustained maximum brightness will hit the LED backlight’s thermal limit first, causing automatic dimming to protect the panel.

How much heat and power does the WXGA matte screen draw when it stays on all day?

The 15.6 inch LED-backlit panel typically draws only a few watts and runs cool enough that surface temperature stays near ambient during all-day use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.