We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Industrial Gigabit PoE switch with DIN rail and wall mounting

Batianda

Batianda 10-Port Gigabit PoE Switch 2 in 1 accessory

SKU CH-H8SP-1X08P

A 10-port Gigabit PoE switch delivering up to 30W per port with 48-57VDC input and DIN-rail mounting for industrial use

  • High-speed 1000Mbps networking across 10 Gigabit ports
  • Powers devices with 30W PoE per IEEE 802.3af/at
  • Flexible 48-57VDC input with energy-efficient IEEE 802.3az
  • Rugged DIN-rail or wall mounting for industrial vibration resistance
  • Operates from -40F to 176F with CE/FCC certification

Industrial 10-Port Gigabit PoE Switch

This managed Ethernet switch delivers ten gigabit ports with IEEE 802.3af/at Power over Ethernet. Each port supplies up to 30W, letting you run IP cameras, wireless access points or VoIP phones without separate power adapters. The unit accepts 48 to 57VDC input and is built for DIN-rail or wall mounting in harsh environments. It operates reliably from -40F to 176F.

Verify power budget and mounting before ordering

Confirm your DC supply can deliver 48 to 57VDC at sufficient current for the total PoE load you plan to connect. Ensure the enclosure or cabinet has DIN-rail clips or wall-mount points that match the switch brackets. Check that linked devices negotiate 10/100/1000Mbps and support 802.3af or 802.3at classification. The switch provides 802.3x flow control but no management interface is mentioned.

Replaces separate injector clusters

If you currently power multiple endpoints with individual injectors or midspan hubs, this unit consolidates cabling and reduces points of failure. It also upgrades older 100Mbps switches that cannot handle modern video or data-intensive streams. The jump is worthwhile when you need ruggedised, wide-temperature operation and a single 20Gbps backplane for ten powered devices.

Highlights

  • High-speed 1000Mbps networking across 10 Gigabit ports
  • Powers devices with 30W PoE per IEEE 802.3af/at
  • Flexible 48-57VDC input with energy-efficient IEEE 802.3az
  • Rugged DIN-rail or wall mounting for industrial vibration resistance
  • Operates from -40F to 176F with CE/FCC certification

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and do I need to buy a power supply separately?

The switch includes the unit and mounting hardware; a 48–57 VDC power source must be supplied separately.

How do I choose between the PoE standards listed for this 10-port switch?

It supports both IEEE 802.3af and 802.3at (up to 30 W per port); the switch negotiates automatically with each connected device.

What does the 20 Gbps figure mean for real-world throughput on this switch?

The 20 Gbps is the total non-blocking switching capacity across all ten Gigabit ports.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.