BASEUS
BASEUS EPS10R1-15 AC Adapter 12V 1.5A 18W
A 12 V, 1.5 A AC adapter that replaces EPS10 power supplies for DirecTV H25, C31, C41 and C41W receivers
- TypeAC Adapters
- Powers DirecTV H25 and C41 receivers reliably
- Delivers 12 V at 1.5 A for stable 18 W output
- Replaces multiple EPS10 variants including EPS10R1-15
- UL listed for electrical safety compliance
- Compatible with C31, C41W and wireless video bridge
Direct replacement for DirecTV receivers
This EPS10R1-15 AC adapter delivers 12V at 1.5A for an 18W output. It serves as a direct replacement for the original power supply used with DirecTV H25, C31, C41, C41W and Stream devices. The unit is UL Listed for safety compliance. It suits owners needing a new power source for compatible satellite equipment.
Compact barrel connector design
The adapter uses a standard barrel connector that fits the target DirecTV receivers and wireless video bridges. Its lightweight plastic housing allows easy routing behind entertainment units. The fixed cable eliminates loose connection points at the brick. No additional mounting hardware is required for typical set-top box installations.
Replaces EPS10 series variants
This model replaces EPS10R1-15, EPS10R0-16 and EPS10R4-16 power supplies without modification. The upgrade is worth it when the original adapter fails or is lost. It is not for users needing higher amperage or a different voltage for non-compatible hardware.
Highlights
- Powers DirecTV H25 and C41 receivers reliably
- Delivers 12 V at 1.5 A for stable 18 W output
- Replaces multiple EPS10 variants including EPS10R1-15
- UL listed for electrical safety compliance
- Compatible with C31, C41W and wireless video bridge
Specifications
| Type | AC Adapters |
|---|
Questions about this item
What output voltage and current does the EPS10R1-15 adapter deliver to the DirecTV H25 receiver?
The adapter supplies 12 V at 1.5 A, giving a maximum of 18 W to the H25 or compatible C31, C41 and C41W models.
What connector size must the replacement tip match for a direct fit on the H25?
The EPS10 series uses a barrel plug that fits the H25, C31, C41, C41W, wireless video bridge and broadband DECA units without an adapter.
How is the EPS10R1-15 connected, and which step do installers often skip?
Plug the barrel tip firmly into the receiver’s power port, then connect the IEC mains lead to a wall socket; the step often missed is seating the barrel fully until it clicks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



