We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 5.5 by 2.5 mm barrel plug

BASEUS

BASEUS AC Adapter 24V 10A 240W 5.5x2.5mm

SKU CH-0VV0-2EVPR

Delivers 24 V at up to 10 A with automatic overload, over-voltage, over-current, over-temperature and short-circuit protection for LED strips, CCTV, 3D printers and other 24 V devices under 240 W

  • TypeAC Adapters
  • Delivers stable 24 V output with minimal voltage fluctuation
  • Built-in overload, over-voltage, over-current, over-temperature and short-circuit protections
  • Accepts 100–240 V 50/60 Hz input for worldwide use
  • 5 × 2.5 mm barrel plug also fits 5.5 × 2.1 mm sockets
  • Powers 24 V devices up to 10 A and 240 W such as LED strips, 3D printers and CCTV cameras

Power adapter for 24 V equipment

This new AC adapter delivers a regulated 24 V output at up to 10 A for a maximum of 240 W. It accepts a universal 100-240 V input at 50-60 Hz, making it suitable for indoor use worldwide. The barrel connector measures 5.5 mm by 2.5 mm and is also compatible with 5.5 mm by 2.1 mm jacks. Polarity is centre positive, sleeve negative.

Replaces undersized or failed 24 V supplies

Swap out an original adapter that has failed or a lower-current unit that cannot meet the load. The step up is worthwhile when the connected device draws more than the previous supply could provide continuously. Built-in overload, over-voltage, over-current, over-temperature and short-circuit protection shut the unit down before damage occurs. Constant-voltage regulation keeps the output stable during power-on and power-off transitions.

Handles loads up to 240 W

Comfortably powers LED strips, 3D printers, CCTV cameras, audio amplifiers, routers and similar 24 V gear rated at 1 A through 10 A. The adapter will be damaged if the load exceeds 10 A, so it cannot serve devices that require more current. Indoor-only rating limits deployment to protected environments.

Highlights

  • Delivers stable 24 V output with minimal voltage fluctuation
  • Built-in overload, over-voltage, over-current, over-temperature and short-circuit protections
  • Accepts 100–240 V 50/60 Hz input for worldwide use
  • 5 × 2.5 mm barrel plug also fits 5.5 × 2.1 mm sockets
  • Powers 24 V devices up to 10 A and 240 W such as LED strips, 3D printers and CCTV cameras

Specifications

TypeAC Adapters

Questions about this item

What barrel-plug size does the 24 V 10 A adapter use, and will it fit a 5.5 mm × 2.1 mm jack?

The connector is 5.5 mm × 2.5 mm and is compatible with 5.5 mm × 2.1 mm jacks. Polarity is centre-positive, outer-negative.

What is the first step when installing this power supply, and what common mistake should I avoid?

Verify the device needs 24 V DC and draws 10 A or less before plugging in. The common mistake is connecting a load above 10 A, which triggers overload protection and can damage the unit.

What ongoing care does the 240 W adapter require, and which part might need replacement?

Keep ventilation slots clear and operate indoors only. The IEC mains lead is the only user-replaceable part; the DC cable and barrel plug are fixed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.