We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular AC adapter with 6ft cord and DC plug

BASEUS

BASEUS 9V 2A AC adapter for DYMO LabelManager Rhino 6000 5200 4200

SKU CH-YTSD-8WG99

A 9V 2A AC adapter with 100-240V input, 6ft cord and 5.5×2.1 mm or 2.5 mm DC plug powers compatible DYMO LabelManager and LabelPoint printers

  • TypeAC Adapters
  • Delivers stable 9 V 2 A output for reliable label printing
  • 100–240 V 50/60 Hz input works worldwide
  • 6 ft cord gives flexible placement on any desk
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection
  • Fits DYMO Rhino 6000, 5200, 4200 and many LabelManager models

Power specification

This AC adapter delivers a fixed 9V output at up to 2A with an input range of 100-240V at 50/60Hz. The DC connector measures 5.5 x 2.1 mm and 2.5 mm with centre-negative polarity. Built-in safeguards include short-circuit, over-current, over-voltage and over-temperature protection. A 6 ft cable provides flexible placement for desktop or bench use.

Compatible label printers

It fits DYMO LabelManager models including Rhino 6000, 5200 and 4200 plus LM-160, 500TS, 100, 150, 220P, 350, LM210D and LM-200. Label Point devices such as LP200, LP250, LP300, LP350 and the 1000, 2000, 3500, 4500, 5500 series are also supported. Buyers whose label maker requires a different voltage, current rating or connector size should select another supply.

9V 2A output with 5.5x2.1mm plug

The decisive factor is the 9V 2A rating combined with the 5.5 x 2.1 mm centre-negative barrel plug. Verify that the printer’s DC jack matches this dimension and that its power label specifies 9V at 2A or lower. If the device needs a higher amperage, a different connector diameter or a centre-positive polarity, this adapter will not work.

Highlights

  • Delivers stable 9 V 2 A output for reliable label printing
  • 100–240 V 50/60 Hz input works worldwide
  • 6 ft cord gives flexible placement on any desk
  • Built-in short-circuit, over-current, over-voltage and over-temperature protection
  • Fits DYMO Rhino 6000, 5200, 4200 and many LabelManager models

Specifications

TypeAC Adapters

Questions about this item

Will the 9V 2A rating run my DYMO Rhino 6000 without overheating?

The adapter delivers a steady 9V at up to 2A with built-in over-temperature, over-voltage, over-current and short-circuit protection, so the Rhino 6000 receives the exact power it expects.

What does the 5.5×2.1 mm and 2.5 mm DC plug with inside-negative polarity mean for compatibility?

The tip fits both 2.1 mm and 2.5 mm centre-pin jacks and the sleeve is positive while the centre is negative, matching the DYMO LabelManager series power input.

How much reach does the 6ft cord give me when the label maker sits on a bench?

A six-foot cable lets you place the power brick on the floor or a nearby outlet while the printer stays on the work surface without tension.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.