BASEUS
BASEUS 5V 2A 10W AC Adapter 100-240V 6.2ft 14 Tips
5 V 2 A 10 W AC adapter with 14 interchangeable tips and 6.2 ft cord for LED lights, CCTV cameras, baby monitors and other 5 V devices
- TypeAC Adapters
- Works worldwide with 100-240V input
- 2 ft cord gives flexible placement
- 14 tips cover 90% of 5V devices
- 5V 2A 10W output powers up to 2A loads
- Includes Micro-USB, Type-C and terminal connector
5 V 10 W adapter with 14 tips
This 5 V 2 A AC adapter delivers up to 10 W from a 100-240 V mains supply. It includes 14 interchangeable DC tips covering common barrel sizes, Micro-USB and Type-C connectors. The unit suits low-power 5 V devices such as LED strips, baby monitors, CCTV cameras and TV boxes. Polarity is centre-positive.
Thermals noise and power draw
The adapter draws a maximum of 10 W from the wall and runs silently with no moving parts. A 6.2 ft cord gives flexible placement without extension leads. Normal operation stays cool to the touch when powering loads up to the rated 2 A. No fan noise or coil whine is present.
Sustained load behaviour
Continuous operation at the full 2 A output remains within the 10 W rating and the adapter maintains a stable 5 V. It is not suitable for devices that need 12 V, 19 V or 24 V, nor for equipment that draws more than 2 A. The 90 % tip coverage claim refers to common 5 V household and office electronics.
Highlights
- Works worldwide with 100-240V input
- 2 ft cord gives flexible placement
- 14 tips cover 90% of 5V devices
- 5V 2A 10W output powers up to 2A loads
- Includes Micro-USB, Type-C and terminal connector
Specifications
| Type | AC Adapters |
|---|
Questions about this item
How do I install the BASEUS 5V 2A adapter and which tip polarity do I match?
Plug the AC cord into a 100-240V 50/60Hz outlet, choose the tip that fits your device jack, and ensure the connector polarity is internal positive, outside negative before powering on.
What maintenance or replacement will the 6.2ft cord and 14 tips need over time?
Inspect the cord for fraying near the strain relief and check each tip for bent pins or loose fit; replace any tip that no longer seats firmly or shows corrosion on the contacts.
What limit appears first when the adapter runs at full 10W load for long periods?
The 2A output ceiling is reached first; drawing more than 2 amps will trigger the protection circuit and shut the unit down until the load drops.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



