BASEUS
BASEUS 5V 1A AC Adapter 9.6 ft USB-C 8 Tips
Converts 100-240V AC to 5V 1A DC with a 9.6 ft cable and eight interchangeable tips for 5V devices
- TypeAC Adapters
- Flexible placement with 9.6 ft power cord
- Wide device compatibility via 8 interchangeable tips
- Global voltage input from 100 to 240 V
- Built-in safety chip prevents overload and short circuits
- Powers 5 V devices up to 5 W maximum
What this adapter powers
This BASEUS AC adapter converts 100-240 V mains input to a regulated 5 V DC output at up to 1 A. The 9.6 ft cable and eight interchangeable tips cover barrel connectors from 2.5 x 0.7 mm to 5.5 x 2.5 mm plus Micro-USB and USB-C. Center-positive polarity matches most small DC devices.
Who it suits and who it does not
It suits owners of security cameras, baby monitors, routers, USB hubs and similar 5 V gear drawing 1 A or less. It is not for equipment that needs more than 1 A at 5 V or that operates at a different voltage. The fixed 5 V output cannot serve devices requiring adjustable or higher voltages.
The deciding specification
The adapter delivers a maximum of 5 W at 5 V with a 1 A current limit. If your device’s nameplate shows 5 V and a current draw of 1 A or below, this unit will power it; if the draw exceeds 1 A, you need a higher-rated supply.
Highlights
- Flexible placement with 9.6 ft power cord
- Wide device compatibility via 8 interchangeable tips
- Global voltage input from 100 to 240 V
- Built-in safety chip prevents overload and short circuits
- Powers 5 V devices up to 5 W maximum
Specifications
| Type | AC Adapters |
|---|
Questions about this item
Which devices can I connect using the included 5.5 x 2.5 mm plug and eight additional tips?
The kit supplies a 5.5 x 2.5 mm barrel plug plus tips measuring 4.0 x 1.7 mm, 3.5 x 1.35 mm, 3.0 x 1.1 mm, 2.5 x 0.7 mm, Micro-USB, USB Type-C, 5.5 x 2.1 mm and a terminal connector, all centre-positive.
Will this adapter safely power a legacy 5 V device that draws only 350 mA?
Yes. The supply delivers up to 1 A and the smart chip provides over-current, over-voltage, short-circuit, under-voltage and over-temperature cut-offs, so lower-draw equipment is protected.
How can I verify the unit is operating correctly once plugged in?
The adapter accepts 100–240 V AC at 50/60 Hz and outputs a steady 5 V DC at up to 1 A; if your connected device powers on and runs without the brick overheating or shutting down, the supply is working as intended.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



