BASEUS
BASEUS 24V 4A 96W AC Adapter 5.5x2.5mm
Delivers 24 V DC at up to 4 A through a 5.5 × 2.5 mm barrel plug, with overload, over-voltage, over-current, over-temperature and short-circuit protection
- TypeAC Adapters
- Delivers 96W stable power for demanding 24V devices
- Wide 100-240V input suits global mains voltages
- 5x2.5mm barrel plug fits many monitors and LED strips
- Multiple safety protections guard against overload and short circuits
- Compatible with 5.5x2.1mm connectors for broader device support
Purpose and compatibility
This 96 W AC adapter converts 100–240 V mains input at 50/60 Hz into a regulated 24 V DC output up to 4 A. The barrel connector measures 5.5 mm by 2.5 mm and is also compatible with 5.5 mm by 2.1 mm plugs. Polarity is centre-positive.
Who it suits and who it does not
It powers LED strips, CCTV cameras, LCD monitors, massage chairs and other 24 V devices drawing less than 4 A. It is not a battery charger and cannot supply equipment that requires more than 96 W or a different output voltage.
Protection and practical impact
Built-in overload, over-voltage, over-current, over-temperature and short-circuit protections shut the unit down before connected gear is damaged. The wide input range lets the same adapter operate on mains supplies worldwide without a voltage selector.
Highlights
- Delivers 96W stable power for demanding 24V devices
- Wide 100-240V input suits global mains voltages
- 5x2.5mm barrel plug fits many monitors and LED strips
- Multiple safety protections guard against overload and short circuits
- Compatible with 5.5x2.1mm connectors for broader device support
Specifications
| Type | AC Adapters |
|---|
Questions about this item
What input voltage range must my mains supply provide for the 24 V 4 A adapter to operate?
The unit accepts 100 to 240 V AC at 50 or 60 Hz, so it works on standard household mains worldwide.
Will the 5.5 mm × 2.5 mm barrel plug fit my device if it currently uses a 5.5 mm × 2.1 mm connector?
Yes, the adapter is compatible with both 5.5 mm × 2.5 mm and 5.5 mm × 2.1 mm sockets; polarity is centre-positive.
How can I confirm the adapter is delivering a stable 24 V output after I connect it?
Measure the DC plug with a multimeter; you should read approximately 24 V with the centre pin positive and the barrel negative.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



