We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black rectangular AC adapters with US plug and 5.5x2.5mm barrel connector

BASEUS

BASEUS 2 Pack 24V 2A AC Adapter 5.5x2.5mm US Plug

SKU CH-W1KP-64NXG

Two 24 V 2 A AC-to-DC adapters with US plug and 5.5 × 2.5 mm barrel tips deliver 48 W each for LED strips, 3D printers or CCTV gear

  • TypeAC Adapters
  • Two-pack convenience for spare or multi-device use
  • 100–240 V input works worldwide
  • 24 V 2 A output powers LED strips and 3D printers
  • 5 × 2.5 mm barrel jack fits common devices
  • 90 cm cable gives flexible placement

What this product is

This is a two-pack of 24V 2A AC-to-DC power adapters with a US mains plug. Each unit delivers up to 48W from a 100-240V 50-60Hz input through a fixed 5.5x2.5mm barrel jack on a 90cm cord. They are built for devices that require a regulated 24V supply at or below 2A.

Who it suits and who it does not

The adapters suit owners of 24V LED strips, 3D printers, CCTV cameras, routers, hubs and similar gear that draws up to 2A. They are not for equipment that needs more than 48W or a current draw above 2000mA. Buyers whose devices use a different barrel size, voltage or polarity should look at something else.

Capacity and headroom

Each adapter comfortably powers loads such as 300mA, 500mA, 1A, 1.5A or the full 2A rating. The supply automatically provides only the current the device draws up to that limit. If a connected device attempts to pull more than 2A the unit will not operate correctly and may be damaged, so that ceiling must not be exceeded.

Highlights

  • Two-pack convenience for spare or multi-device use
  • 100–240 V input works worldwide
  • 24 V 2 A output powers LED strips and 3D printers
  • 5 × 2.5 mm barrel jack fits common devices
  • 90 cm cable gives flexible placement

Specifications

TypeAC Adapters

Questions about this item

What input voltage range does this AC adapter accept?

The adapter accepts an AC input range of 100 to 240 volts at 50 to 60 Hz, so it works on mains supplies worldwide with only a plug adapter if needed.

Will the 5.5 mm × 2.5 mm barrel connector fit my existing 24 V equipment?

The output cord terminates in a 5.5 mm outer, 2.5 mm inner diameter barrel jack, the common size for many LED strips, 3D printers and CCTV cameras that require 24 V DC.

How can I confirm the adapter is delivering the rated 48 W after I connect it?

Measure the output with a multimeter; it should read 24 V DC under load, and the connected device should operate normally without the adapter overheating or shutting down.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.