BASEUS
BASEUS 100W IP67 AC-DC Adapter 12V 8.3A 85-265V
Waterproof IP67 AC-to-DC adapter converts 85-265 V mains to 12 V 8.3 A for LED strips
- TypeAC Adapters
- Delivers up to 100 W for demanding LED strips
- IP67 rating protects against dust and heavy rain
- Wide 85–265 V AC input works worldwide
- Silent aluminium housing runs without fan noise
- Auto-recovery protection guards against shorts and overheating
What this power supply does
This AC-to-DC adapter converts a mains input of 85 to 265 volts at 50 or 60 hertz into a steady 12 volt DC output at 8.3 amps. It delivers up to 100 watts maximum power with an 80 percent rated load, making it suitable for LED light strips and other low-voltage lamp products. The unit carries an IP67 rating for indoor or outdoor use but must not be fully immersed in water.
Installing the adapter
A 3-foot cable with a 3-prong plug connects directly to a standard mains socket, so no special wiring is required. The slim aluminium housing fits inside chandelier holes or air-conditioner inspection openings for discreet mounting. Automatic hiccup-mode protection recovers from short circuit, overload, over-voltage, over-current or over-temperature faults without flicker once the fault is cleared. Note that the driver cannot be used with dimmable circuits.
Check before ordering
Verify that your lighting load is a non-dimmable lamp product operating at 12 volts DC and does not exceed the 100 watt maximum or the 80 percent continuous rating. Confirm the installation site can accommodate the IP67-rated enclosure without full water immersion. Ensure the 3-foot input cable reaches your mains outlet and that the 3-prong plug matches your local socket type.
Highlights
- Delivers up to 100 W for demanding LED strips
- IP67 rating protects against dust and heavy rain
- Wide 85–265 V AC input works worldwide
- Silent aluminium housing runs without fan noise
- Auto-recovery protection guards against shorts and overheating
Specifications
| Type | AC Adapters |
|---|
Questions about this item
How can I confirm the adapter is operating correctly once installed?
The unit runs silently with no fan noise, and the aluminium housing stays warm but not excessively hot during normal load, indicating the built-in protection circuits are functioning.
What comes in the box and what must I supply separately?
The adapter ships with a 3-foot AC cord ending in a 3-prong plug; you only need to provide the 12 V DC wiring to your LED strip or lamp.
Which version should I choose for a 100 W outdoor LED project?
Select the 12 V 8.3 A model rated for 100 W maximum (80 % continuous) with IP67 sealing and 85-265 V AC input to cover global mains voltages.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



