We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black USB 3.0 to SATA IDE adapter 100mm x 63mm x 15mm

Barrow Mods

Barrow Mods USB 3.0 to SATA/IDE Adapter 2 in 1 accessory

SKU CH-G6DF-VXEY2

Connects 2.5" and 3.5" SATA or IDE drives via USB 3.0, backward compatible with USB 2.0 and 1.1

  • Connect idle 2.5 or 3.5 drives via USB 3.0
  • Read SATA and IDE media with one compact adapter
  • Plug-and-play design needs no driver installation
  • USB 3.0 speed with USB 2.0 and 1.1 backward compatibility
  • Pocket-sized at 100 mm by 63 mm by 15 mm

USB 3.0 to SATA/IDE adapter

This Barrow Mods accessory connects 2.5-inch and 3.5-inch SATA or IDE hard drives and optical drives to a computer through a USB 3.0 port. It is built for technicians, hobbyists and anyone who needs to read, copy or archive data from legacy or spare drives without installing them internally.

Suits users with SATA or IDE drives

It suits users who have idle SATA hard drives, SSDs or IDE hard drives and CD/DVD drives they want to access externally. It is not for anyone who needs to connect drives that use interfaces other than SATA or the two IDE form factors listed, nor for those who want to transfer data directly between two computers without involving drives.

Single SATA port with dual IDE support

The adapter provides one SATA interface and two IDE interfaces covering both 2.5-inch and 3.5-inch devices, letting you turn multiple legacy drives into removable storage through a single USB 3.0 connection that remains backward compatible with USB 2.0 and 1.1.

Highlights

  • Connect idle 2.5 or 3.5 drives via USB 3.0
  • Read SATA and IDE media with one compact adapter
  • Plug-and-play design needs no driver installation
  • USB 3.0 speed with USB 2.0 and 1.1 backward compatibility
  • Pocket-sized at 100 mm by 63 mm by 15 mm

Specifications

No published specifications for this item yet.

Questions about this item

Will the SATA connector on the adapter wear out after many drive swaps?

The SATA port is a standard connector rated for repeated mating cycles; normal drive swaps will not require replacement of the adapter itself.

What speed ceiling appears first when copying large files continuously?

The USB 3.0 interface caps sustained throughput at its 5 Gbit/s signalling rate, which becomes the bottleneck before the drive’s own limits.

Does the adapter get hot or draw extra power when left running all day?

The compact L100MM*W63MM*H15MM body has no active cooling; it stays cool under typical loads because it only passes power to the attached drive.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.