We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver rotary offset fitting with 15mm adjustment and 360 degree rotation

Barrow Mods

Barrow Mods TX360PZ-15-Silver 360° Rotary 15mm Offset Fitting

SKU CH-8C0Z-053S4 MPN TX360PZ-15-Silver

A G1/4" rotary offset adapter with 360° rotation and 15mm adjustment for parallel hard-tube runs

  • FeaturesThis adapter fitting allows for fine adjustment of hard tube
  • 360° rotation enables precise tube alignment
  • ±15 mm offset adjustment for perfectly parallel runs
  • G1/4 threaded connection fits standard water-cooling loops
  • Silver finish matches premium build aesthetics
  • Single fitting included for targeted routing corrections

Precise Hard-Tube Alignment

This Barrow Mods adapter fitting is built for custom liquid-cooling loops that use rigid tubing. It provides 360-degree rotary movement so the joint can be oriented in any direction. The 15mm offset lets you shift the tube centreline to achieve perfectly parallel runs. It suits builders who need exact geometry without forcing bends.

G1/4 Threaded Construction

The fitting uses a standard G1/4 threaded connection compatible with most water-blocks, radiators and reservoirs. Its all-metal body resists corrosion and handles typical loop pressures. The rotary collar turns smoothly by hand, then locks in place so vibration cannot change the angle. One unit is supplied in the package.

Passive Operation

No pump, fan or power draw is involved because the part is a static mechanical joint. It adds negligible flow restriction and produces zero noise. Thermal performance depends entirely on the rest of the loop. Builders who need active cooling or integrated sensors must look elsewhere.

Highlights

  • 360° rotation enables precise tube alignment
  • ±15 mm offset adjustment for perfectly parallel runs
  • G1/4 threaded connection fits standard water-cooling loops
  • Silver finish matches premium build aesthetics
  • Single fitting included for targeted routing corrections

Specifications

BrandBarrow
ModelTX360PZ-15-Silver
FeaturesThis adapter fitting allows for fine adjustment of hard tube angles
Part NumberTX360PZ-15-Silver

Questions about this item

What thread standard does the G1/4" rotary offset fitting use?

The fitting uses a G1/4" thread, the common standard for custom liquid-cooling components, so it screws directly into most water-blocks, radiators and reservoirs without adapters.

What clearance does the 15 mm offset fitting need inside the case?

The body adds a 15 mm lateral shift, so allow at least that much space between the port centre-line and any neighbouring component or panel for the tubing to run parallel.

How is the rotary offset fitting installed without leaking?

Screw the G1/4" end into the port by hand, then tighten a quarter turn with a wrench; rotate the 360° collar to align the offset, lock the collar, then push the hard tube into the compression end — forgetting to lock the collar before inserting the tube is the common mistake.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.