We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent acrylic Mini ITX case with clear side panel and perforated sides

Barrow Mods

Barrow Mods Transparent Mini ITX Case 4.3L Clear Panel 2 in 1 Accessory

SKU CH-Y4A7-PW1XM

A 4.3-litre transparent acrylic Mini-ITX chassis measuring 242 x 192 x 115 mm supports a 170 mm board, two 2.5-inch drives, a Flex or 1U PSU, and cards up to 180 mm with 360-degree venting

  • Compact 4.3L volume fits Mini ITX builds
  • Transparent acrylic panel shows component status
  • 360-degree perforations maximise airflow cooling
  • Tool-free assembly with protective films included
  • Supports 170mm motherboard, 180mm PCIe cards, 2 x 2.5in SSDs

Compact Mini-ITX Chassis

The Barrow Mods transparent Mini-ITX case is a 4.3L acrylic enclosure built for small-form-factor PC builds. It accepts Mini-ITX motherboards up to 170mm square, two 2.5-inch drives, and FLEX or 1U power supplies. The clear side panel removes easily for component inspection. 360-degree perforations promote airflow throughout the 242 x 192 x 115mm frame. Weighing 27.7oz, it suits DIY builders who want a portable, showcase-ready system.

Ideal For Showcase Builds

This case suits enthusiasts assembling a compact desktop with standard Mini-ITX parts and PCIe cards up to 180mm long. Builders needing room for full-size ATX power supplies, 3.5-inch drives, or graphics cards longer than 180mm should consider larger enclosures. Liquid-cooling radiators and tall CPU coolers will not fit the 4.5-inch internal height. The design targets air-cooled, space-saving configurations only.

180mm GPU Length Limit

The single specification that decides compatibility is the maximum PCIe device length of 180mm. Measure your graphics card or add-in board before purchase; anything longer cannot be installed. All other clearances — motherboard size, drive bays, power-supply format — follow common Mini-ITX standards, but the 180mm limit is the hard constraint unique to this chassis.

Highlights

  • Compact 4.3L volume fits Mini ITX builds
  • Transparent acrylic panel shows component status
  • 360-degree perforations maximise airflow cooling
  • Tool-free assembly with protective films included
  • Supports 170mm motherboard, 180mm PCIe cards, 2 x 2.5in SSDs

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the motherboard in the Barrow Mods Transparent Mini ITX Case, and what step do people often get wrong?

Mount the 170mm Mini ITX board using the included standoffs, then fit the FLEX or 1U power supply before sliding the acrylic side panel on; the step most builders miss is removing the protective film from both sides of every clear panel first, otherwise fingerprints and scratches are locked in.

What maintenance or replacement will this case need later?

The acrylic panels can cloud or scratch over time, so plan to replace a side panel if clarity degrades; the cushioning foot pads may also compress and should be swapped for fresh adhesive pads to keep the 27.7oz chassis stable.

What thermal limit appears first under sustained load in this 4.3L chassis?

With only 360-degree hollowed holes for passive airflow, the GPU exhaust temperature hits its ceiling first — especially with a 180mm-long card — because no fan mounts exist to move heat out faster.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.