We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow armored duplex fiber cable with SC UPC connectors on both ends, 30 metre length

Barrow Mods

Barrow Mods SC UPC-SC UPC Armored Singlemode Fiber Patch Cord Duplex 9/125um 30m 2 in 1 accessory

SKU CH-W6QA-KPBJR

Singlemode duplex fiber patch cord with SC UPC connectors, 30 m length, 9/125 µm core, .30 dB max insertion loss and >50 dB return loss

  • Singlemode 9/125 µm duplex link spans 30 m for long-distance connectivity
  • Armored jacket withstands sun, rain and temperatures from -40 °C to 80 °C
  • Insertion loss below 0.30 dB and return loss above 50 dB preserve signal quality
  • Minimum bend radius of 0.8 in allows tight routing without damage
  • Rated for over 1000 mating cycles so the connection stays reliable

SC UPC duplex singlemode fiber patch cord

The Barrow Mods armored patch cord provides a duplex singlemode link with SC UPC connectors on both ends. It spans thirty metres and uses a nine over one hundred twenty five micron fiber core for long-distance data transmission. The cable suits indoor or outdoor installations where a reliable fiber jumper is required.

Low loss and wide temperature operation

Insertion loss stays below zero point three zero decibels while return loss exceeds fifty decibels. The assembly operates from minus forty to eighty degrees Celsius and resists sun, rain, dust and humidity. A minimum bend radius of zero point eight inch allows tight routing without signal degradation.

Armored construction for harsh environments

The armored jacket protects the fiber core during pulls through conduit or across rough surfaces. Connectors can be disconnected and reconnected more than one thousand times for maintenance or reconfiguration. Few special tools are needed, so installation is straightforward for technicians with basic fiber skills.

Highlights

  • Singlemode 9/125 µm duplex link spans 30 m for long-distance connectivity
  • Armored jacket withstands sun, rain and temperatures from -40 °C to 80 °C
  • Insertion loss below 0.30 dB and return loss above 50 dB preserve signal quality
  • Minimum bend radius of 0.8 in allows tight routing without damage
  • Rated for over 1000 mating cycles so the connection stays reliable

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the SC UPC connectors on this 30m armored duplex patch cord and what step is commonly missed?

Clean both connector end faces with a lint-free wipe and isopropyl alcohol before mating; the step often skipped is inspecting the ferrules under a microscope to confirm no debris remains.

What maintenance will this singlemode 9/125um fiber jumper require over its service life?

Periodic end-face cleaning and visual inspection; the cable is rated for more than 1000 mating cycles, so replacement is only needed if insertion loss exceeds 0.30 dB or return loss drops below 50 dB.

What is the first performance limit reached when this patch cord is bent tightly during a long outdoor run?

The minimum bend radius of 0.8 inch (2 cm); exceeding it increases attenuation and can permanently damage the 9/125 um fiber core.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.