We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two aqua duplex fibre patch cables with LC connectors, 10 metre length

Barrow Mods

Barrow Mods OM3 LC-LC Duplex 10 m 2-pack 2 in 1 accessory

SKU CH-0GQD-KYQ42

Two 10 m OM3 duplex LC-LC patch cords with .3 dB insertion loss, 30 dB return loss, 7.5 mm bend radius and LSZH jacket rated from -20 to 70 °C

  • Supports 10 Gb and 40 Gb Ethernet links
  • Low 0.3 dB insertion loss ensures stable transmission
  • LSZH jacket rated from -20 to 70 degrees
  • 5 mm bend radius fits tight cabinet spaces
  • 10 metre duplex cables with 50/125 micron fibre

Duplex OM3 LC-LC patch cables

This two-pack supplies two ten-metre duplex cables with LC connectors on both ends. Each cable uses OM3 multimode fibre rated for 10 Gb and 40 Gb Ethernet links. The pair suits installers who need ready-made jumpers for switches, transceivers or media converters in a rack or cabinet.

Replacing loose bulk fibre and field-terminated ends

Pre-terminated duplex cables remove the need for fusion splicing or polishing on site. The jump is worth it when deployment speed matters and when repeatable insertion loss below .3 dB and return loss above 30 dB are required for link certification.

Ten-metre reach with tight-bend tolerance

At 850 nm the cables support 550 metres at 1 Gb, 300 metres at 10 Gb and rated 40 Gb distances per the OM3 standard. The 7.5 mm bend radius and 2.0 mm LSZH jacket let them route through dense patch panels or 20-plus bend paths without macro-bending loss, while the operating range of -20 to 70 covers most indoor environments.

Highlights

  • Supports 10 Gb and 40 Gb Ethernet links
  • Low 0.3 dB insertion loss ensures stable transmission
  • LSZH jacket rated from -20 to 70 degrees
  • 5 mm bend radius fits tight cabinet spaces
  • 10 metre duplex cables with 50/125 micron fibre

Specifications

No published specifications for this item yet.

Questions about this item

What is the minimum bend radius for the 2.0 mm LSZH jacket?

The cable has a 7.5 mm minimum bend radius, allowing tight routing in high-density cabinets without macro-bending loss.

How do you correctly seat the LC duplex connectors into SFP+ transceivers?

Align the keyed duplex clip, push both ferrules straight in until the latch clicks, then tug gently to confirm lock; the common error is inserting at an angle which misaligns the 50/125 µm cores.

When should the patch cables be replaced based on insertion-loss performance?

Replace if measured insertion loss exceeds the rated 0.3 dB or return loss drops below 30 dB, indicating connector wear or fibre degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.