Barrow Mods
Barrow Mods Gas Spring Monitor Arm 17-35" White 2 in 1 Accessory
Gas-spring monitor arm holds 17 to 35 inch screens up to 24.2 lbs with 800 NM force, -45 to +90 tilt, 90 swivel, 360 rotation, 5.7 to 16.9 inch height range, VESA 75 and 100, C-clamp or grommet mount
- Supports 17 to 35 inch screens with VESA 75x75mm and 100x100mm
- Automotive-grade gas spring delivers 800 NM force tested over 25000 cycles
- Height adjustable from 5.7 to 16.9 inches with single-handed control
- Tilt -45 to +90 degrees, swivel 90 degrees, rotate 360 degrees
- Two installation options: heavy-duty C-clamp or grommet mount
What it is and who it fits
This gas-spring monitor arm supports screens from 17 to 35 inches weighing 4.4 to 24.4 lbs and mounts to VESA 75x75mm or 100x100mm patterns. It suits home-office workers and collaborative setups that need single-handed height, tilt, swivel and 360 rotation adjustment. Buyers with displays heavier than 24.4 lbs or outside the 17-35 inch range should choose a different mount.
Capacity and headroom
The automotive-grade spring delivers 800 NM force, tested over 25000 cycles for 80 percent greater stability than conventional 500 NM arms. Height travels 5.7 to 16.9 inches, tilt spans -45 to +90 degrees, and swivel reaches 90 degrees. Screens heavier than 24.4 lbs exceed the rated capacity and will not hold position reliably.
Thermals noise and power
No active cooling or electrical components are present, so the arm adds zero fan noise and draws no power. The gas spring operates silently during adjustments. All movement is mechanical, leaving system thermals and acoustics unchanged.
Highlights
- Supports 17 to 35 inch screens with VESA 75x75mm and 100x100mm
- Automotive-grade gas spring delivers 800 NM force tested over 25000 cycles
- Height adjustable from 5.7 to 16.9 inches with single-handed control
- Tilt -45 to +90 degrees, swivel 90 degrees, rotate 360 degrees
- Two installation options: heavy-duty C-clamp or grommet mount
Specifications
No published specifications for this item yet.
Questions about this item
Will the 800 NM gas spring hold my 24.2 lb monitor steady alongside my existing dual-mount pole?
The arm is rated for screens up to 24.2 lbs and the 800 NM spring provides 60 % more force than a standard 500 NM unit, so it will support that weight without drift when mounted on the same desk.
How can I verify the arm moves through its full -45 to +90 tilt and 360 rotation after I clamp it?
After installation, grasp the monitor and sweep it through the full tilt range, swivel 90 degrees each way, and rotate 360 degrees; smooth, single-handed motion at every stop confirms the gas spring and joints are working.
Does the package include both the C-clamp and grommet hardware, or do I need to buy one separately?
The box contains the monitor arm, a heavy-duty C-clamp for desks up to 3.5 inches thick, and a grommet mount kit, so no extra mounting parts are required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
