Barrow Mods
Barrow Mods G1/4" 10mm Male to Male Gender Changer Silver
Connects two G1/4" fittings with a 10mm male-to-male extender for reservoirs and pump tops
- ColorSilver
- Features*No Original Packaging, Each Fitting Individually Bagged*
- Connects two G1/4" fittings with a 10 mm male-to-male thread
- Extends reach between reservoirs, pump tops and other G1/4" components
- Silver finish matches common loop aesthetics
- Each fitting individually bagged for protection
- No original packaging reduces waste
G1/4" 10mm Male-to-Male Extender
The Barrow Mods silver extender joins two G1/4" female ports with a 10 mm male thread on each end. It is built for custom liquid-cooling loops that need a short, rigid bridge between components such as reservoirs or pump tops. Each fitting ships individually bagged without retail packaging.
Loop Builders Needing a Short Rigid Link
This adapter suits builders who want a fixed 10 mm spacer between two G1/4" ports. It does not suit installations that require a swivel joint, an angled connection or a longer reach, because the fitting is straight and its length is fixed. Buyers needing a different thread standard or a flexible tube run should choose another part.
10 mm Fixed Thread Length
The decisive specification is the 10 mm male-to-male thread length, which sets the exact spacing between the two connected components. If the gap in your loop matches this dimension the extender fits; if the gap is larger, smaller or requires angular adjustment, this part will not work.
Highlights
- Connects two G1/4" fittings with a 10 mm male-to-male thread
- Extends reach between reservoirs, pump tops and other G1/4" components
- Silver finish matches common loop aesthetics
- Each fitting individually bagged for protection
- No original packaging reduces waste
Specifications
| Brand | Barrow |
|---|---|
| Model | TB2D-02-Silver-BULK |
| Part Number | TB2D-02-Silver-BULK |
| Color | Silver |
| Features | *No Original Packaging, Each Fitting Individually Bagged* |
Questions about this item
What thread size does this 10mm extender accept on each end?
Both ends use standard G1/4" threads so it joins any two G1/4" female ports directly.
How do I install the silver male-to-male adaptor without leaking?
Hand-tighten each end into the G1/4" female ports, then give a slight snug with a wrench — over-tightening the 10mm hex body strips the threads.
When should I replace the O-rings on this G1/4" extender?
Inspect the two internal O-rings whenever you disassemble the loop; swap them if they show flattening, cracking or coolant residue.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115352BTC
In stock
