Barrow Mods
Barrow Mods 800L/H CPU Water Cooling Pump Reservoir DIY Set 2 in 1 accessory
Combines a pump and reservoir for CPU liquid cooling with an 800 L/h flow rate and built-in LED power indicator
- Efficient heat dissipation with 800 L/H flow rate
- Strong 4 m pump head drives coolant effectively
- Integrated pump-reservoir design simplifies installation
- Multi-level construction ensures reliable operation
- LED indicator shows power-on status at a glance
Integrated Pump-Reservoir Unit
The Barrow Mods 2-in-1 accessory combines a pump and reservoir into a single module for custom CPU liquid-cooling loops. It is aimed at DIY builders who want a compact fluid-movement solution without sourcing separate components. The integrated design reduces the number of fittings and tubing runs required during assembly. An LED power indicator confirms the unit is running at a glance.
G 1/4-Inch Thread Constraint
Both inlet and outlet ports use standard G 1/4-inch threads, so every fitting in the loop must match this size. The fixed port spacing limits which angled or rotary adapters can be used in tight chassis areas. Builders must plan tubing routes around the integrated body because the pump cannot be repositioned independently. No alternative port standards or adapter kits are included.
800 L/H Flow Rating
The pump delivers a maximum flow rate of 800 L/H with a 4-metre head pressure, which sets the practical cooling capacity of the loop. Systems with multiple high-restriction blocks or long tubing runs may see reduced flow below this peak figure. Builders targeting higher flow for dense fin stacks or parallel GPU blocks will need a different pump. The fixed speed offers no PWM or voltage control for tuning.
Highlights
- Efficient heat dissipation with 800 L/H flow rate
- Strong 4 m pump head drives coolant effectively
- Integrated pump-reservoir design simplifies installation
- Multi-level construction ensures reliable operation
- LED indicator shows power-on status at a glance
Specifications
No published specifications for this item yet.
Questions about this item
How do I choose the right version of this pump-reservoir combo?
This set is offered as a single integrated 2-in-1 unit with an 800 L/H flow rate and 4 m pump head, so there are no separate versions or capacities to select.
What does the 800 L/H flow rate actually deliver inside a custom loop?
It moves up to 800 litres of coolant per hour, giving strong circulation for efficient CPU heat dissipation in a typical desktop water-cooling system.
What thread standard do the ports use and what does that limit?
The G 1/4" thread ports accept standard G 1/4" fittings, so you must use matching tubing and connectors; other thread sizes will not seal correctly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
