We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow single-mode fibre patch cable with SC and LC connectors, 50m length, 2.0mm LSZH jacket

Barrow Mods

Barrow Mods 2 in 1 accessory SC to LC single-mode fibre patch cable OS2 50m 9/125 µm 2.0mm LSZH yellow

SKU CH-87VN-RQGRR

A 50-metre OS2 single-mode patch cable with SC-to-LC connectors, 9/125 µm core, 2.0 mm LSZH sheath in yellow for indoor Gigabit to 100G Ethernet links

  • 50 m OS2 single-mode link for long-distance 10 GbE
  • SC to LC simplex connectors fit mixed-port equipment
  • 9/125 µm core with 2.0 mm LSZH jacket for indoor safety
  • Yellow colour code identifies single-mode at a glance
  • Ceramic ferrules give low insertion loss on 1 GbE to 100 GbE

Product identity

This Barrow Mods patch cable is a 50-metre OS2 single-mode fibre cord with SC and LC connectors. It is intended for installers and IT teams who need a long indoor link between patch panels, switches or wall outlets. The yellow LSZH jacket identifies the cable as single-mode and meets UL, CUL, IEC and ROHS requirements. Ceramic ferrules keep insertion loss low for reliable operation.

Distance and wavelength limits

The cable supports 10GBASE-L at 1310 nm and 10GBASE-E at 1550 nm, covering typical campus and metro spans. OS2 single-mode fibre also carries 1 G, 10 G, 40 G and 100 G Ethernet rates, but maximum reach depends on the transceiver optics and power budget, not on the cord alone. Attenuation increases with every connector and splice, so total link loss must stay within the receiver sensitivity of the active equipment.

Compatibility checks

Verify that both ends of your link use SC and LC single-mode ports with UPC or APC polish matching the cable ferrules. Confirm the patch-panel or switch port spacing accepts the 2.0 mm simplex cord without sharp bends. Ensure the environment is indoor only, as the LSZH jacket is not rated for outdoor or direct-burial use. Check that your transceivers are specified for the same wavelength and distance class as the intended application.

Highlights

  • 50 m OS2 single-mode link for long-distance 10 GbE
  • SC to LC simplex connectors fit mixed-port equipment
  • 9/125 µm core with 2.0 mm LSZH jacket for indoor safety
  • Yellow colour code identifies single-mode at a glance
  • Ceramic ferrules give low insertion loss on 1 GbE to 100 GbE

Specifications

No published specifications for this item yet.

Questions about this item

What length of OS2 SC to LC single-mode patch cable should I choose for a 50 m run?

The 50 m (164 ft) yellow LSZH cable with 2.0 mm diameter and 9/125 µm fibre matches that distance exactly.

What real-world throughput can I expect from the 9/125 µm single-mode fibre once installed?

It supports 1G, 10G, 40G and 100G Ethernet links at 1310 nm and 1550 nm wavelengths.

Which connectors and fibre standard does the SC to LC patch cable use, and what do they limit?

SC and LC ceramic connectors on OS2 single-mode fibre cap loss to low levels for 1G to 100G Ethernet, fibre channel and LAN use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.