Barrow Mods
Barrow Mods 2 in 1 Accessory LCD Cable Acer Spin 5 SP513-54N-56M2 40PIN
Replacement LCD flex cable with 40-pin connector for Acer Spin 5 SP513-54N-56M2 2-in-1 models
- Replaces the damaged display cable on Acer Spin 5 SP513-54N-56M2
- 40-pin LVDS flex restores video signal to the N19W3 panel
- Matches original part numbers 450.0K202.0001 and 450.0K202.0011 for exact fit
- 100% new component eliminates faults from cracked or broken cables
- Installation requires specialist skill and must be performed with power off
Replacement LCD Flex Cable for Acer Spin 5
This 40-pin flex cable replaces the LVDS video connection in the Acer Spin 5 SP513-54N-56M2 2-in-1. It matches part numbers 450.0K202.0001 and 450.0K202.0011 for the N19W3 panel. The cable is supplied new and ready for installation.
Upgrading from a damaged or faulty display cable
When the original cable is cracked, pinched or no longer transmits a stable image, this part restores the internal video link. The jump is worth it if the screen shows artefacts, flickering or no picture while an external monitor works normally.
Fits inside the 2-in-1 hinge assembly
The flex cable routes through the rotating hinge to connect the mainboard to the N19W3 display panel. Installation requires disassembly of the top cover and screen bezel, so patience and suitable tools are needed. No additional adapters or converters are required.
Highlights
- Replaces the damaged display cable on Acer Spin 5 SP513-54N-56M2
- 40-pin LVDS flex restores video signal to the N19W3 panel
- Matches original part numbers 450.0K202.0001 and 450.0K202.0011 for exact fit
- 100% new component eliminates faults from cracked or broken cables
- Installation requires specialist skill and must be performed with power off
Specifications
No published specifications for this item yet.
Questions about this item
Does the 40PIN LCD flex cable fit the Acer Spin 5 SP513-54N-56M2 2-in-1 with the N19W3 panel?
Yes, the cable carries part numbers 450.0K202.0001 and 450.0K202.0011 and is made for that exact model and screen.
What is the critical installation step that is often missed when replacing this display cable?
The seller reminds you to perform the swap with the laptop completely powered off to avoid shorting the 40PIN connector.
When should this replacement LCD cable be inspected or swapped again?
Inspect the flex if the screen develops flicker, lines or no image; the part is rated as 100% brand new and meant to last the panel's life.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



