Barrow Mods
Barrow Mods 2 in 1 accessory HDMI 2.1 cable 10 ft 48 Gbps 8K 60 Hz 4K 120 Hz
An HDMI 2.1 cable delivers 8K at 60 Hz and 4K at 120 Hz over 10 ft with 48 Gbps bandwidth
- 8K at 60 Hz for ultra-high-definition viewing
- 48 Gbps bandwidth meets HDMI 2.1 specification
- 4K at 120 Hz enables smooth high-frame-rate gaming
- 10 ft length suits distant device connections
- Backward compatible with HDMI 2.0 and earlier versions
What the cable is
This Barrow Mods 2 in 1 accessory is an HDMI 2.1 cable rated for 48 Gbps bandwidth. It supports 8K resolution at 60 Hz and 4K at 120 Hz over a 10 ft length. The cable is backward compatible with HDMI 2.0, 1.4, 1.3, 1.2 and 1.1 specifications.
Who it suits and who it does not
The 10 ft reach suits setups where source and display are separated by several metres, such as home-theatre runs or meeting-room connections. Buyers needing a shorter lead for desk-mounted monitors or a longer run for whole-house distribution should look at other lengths.
The deciding specification
The 48 Gbps ultra-high-speed rating is the single figure that determines whether this cable can carry 8K 60 Hz or 4K 120 Hz signals without compression. If your devices require that bandwidth, this cable meets the HDMI 2.1 standard; if they operate at lower speeds, a lesser-rated cable will also work.
Highlights
- 8K at 60 Hz for ultra-high-definition viewing
- 48 Gbps bandwidth meets HDMI 2.1 specification
- 4K at 120 Hz enables smooth high-frame-rate gaming
- 10 ft length suits distant device connections
- Backward compatible with HDMI 2.0 and earlier versions
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 10 ft length or a shorter cable for my setup?
The 10 ft length works well for setups where the source and display are farther apart, such as a home theatre or office meeting room, while still delivering the full 48 Gbps bandwidth needed for 8K at 60 Hz.
What does the 48 Gbps rating mean when I plug this into my TV and console?
It means the cable can carry the full HDMI 2.1 bandwidth, so you get 8K at 60 Hz, 4K at 120 Hz, and 2K at 240 Hz with features like VRR, eARC and HDR10+ working without compression.
Which HDMI version does this cable use and what does it cap in practice?
It uses HDMI 2.1, which caps the signal at 48 Gbps, enabling 8K at 60 Hz, 4K at 120 Hz, 2K at 240 Hz, plus VRR, eARC, QMS, QFT, HDCP 2.2 and 2.3, Dolby Atmos and DTS:X.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
