Barrow Mods
Barrow Mods 2 in 1 accessory HD backup camera 170° 1280x720 IP68
HD backup camera with 170° view and 1280x720 resolution fits Ford Edge, Escape and Mercury Mariner 2008-2012 models
- Clear rear view with 170° wide angle
- Sharp 1280x720 resolution at 1000 TV lines
- Reliable in extreme cold down to -40
- Waterproof IP68 rating for all weather
- 6 m video cable reaches front display easily
Vehicle fit and purpose
This backup camera replaces the licence-plate light unit on Ford Edge, Escape and Mercury Mariner models from 2008 to 2012. It is designed for drivers who want a clear rear view when reversing and who have an aftermarket display with an RCA input.
Upgrade from factory unit
The original factory camera on these vehicles often fails or delivers a dim image. This unit provides 1000 TV lines and 1280 by 720 effective pixels across a 170 degree viewing angle. The jump is worth it when the existing camera is dead, fogged or too narrow for safe parking.
Build integration needs
The kit includes a 6 metre video cable and a 1.5 metre power lead for a 12 volt supply. An IP68 rating lets it survive immersion, and the operating range spans minus 40 to 70 degrees Celsius. It will not work well with the original factory monitor and may need an adapter for the head unit.
Highlights
- Clear rear view with 170° wide angle
- Sharp 1280x720 resolution at 1000 TV lines
- Reliable in extreme cold down to -40
- Waterproof IP68 rating for all weather
- 6 m video cable reaches front display easily
Specifications
No published specifications for this item yet.
Questions about this item
What size number-plate light recess does the camera need?
The camera is designed to replace the original licence-plate lamp on Ford Edge, Escape 2008-2012 and Mercury Mariner 2008-2012; compare the housing dimensions to your recess before buying.
How do I route the cables and what connector does the display need?
Run the 6 m AV cable from the tailgate to the front dash and plug the RCA connector into an aftermarket monitor; factory displays usually need an extra adapter that is not included.
How long will the IP68 seal last and what should I check over time?
The IP68 rating covers immersion protection from -40 °C to 70 °C; inspect the cable jackets and connector seals annually for cracking or water ingress.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



