We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal fluid head with detachable handle, 60mm base, 1/4 and 3/8 screws

Barrow Mods

Barrow Mods 2 in 1 Accessory Fluid Head 22lb 60mm

SKU CH-SMK6-ZCS99

Supports cameras up to 22 lb with smooth 360° pan and -52° to +91° tilt on a 60 mm base

  • Detachable handle mounts left or right for flexible operation
  • All-metal CNC construction supports 22 lb load at 1.9 lb weight
  • 1/4" and 3/8" top screws fit cameras and telescopes
  • 60 mm base with 3/8" holes attaches to tripods or monopods
  • 360° pan and -52° to +91° tilt enable full-range positioning

Barrow Mods 2-in-1 Fluid Head 22lb 60mm

This fluid head supports cameras and telescopes up to 22 lb with a 60 mm base diameter. A detachable handle mounts on either side while a safety lock secures the payload. The all-metal CNC construction weighs 1.9 lb and provides smooth, quiet rotation. It suits videographers and photographers needing a versatile mounting platform.

Sustained pan and tilt performance

The head rotates 360 degrees horizontally and tilts from -52 to +91 degrees with firm locking at any position. Fluid damping maintains consistent resistance during long takes without jerky movement. All-metal construction prevents flex under continuous 10 kg loads. The mechanism stays stable during extended shooting sessions.

22 lb maximum load capacity

The 10 kg rating determines whether your camera and lens combination can be mounted safely. Exceeding this limit risks instability and equipment damage. The 60 mm base with 3/8 inch threads fits compatible tripods and monopods. Buyers needing higher payload capacity should verify their gear weight against this specification.

Highlights

  • Detachable handle mounts left or right for flexible operation
  • All-metal CNC construction supports 22 lb load at 1.9 lb weight
  • 1/4" and 3/8" top screws fit cameras and telescopes
  • 60 mm base with 3/8" holes attaches to tripods or monopods
  • 360° pan and -52° to +91° tilt enable full-range positioning

Specifications

No published specifications for this item yet.

Questions about this item

Does the fluid head make any noise when panning during long shoots?

The all-metal CNC construction rotates smoothly without noise even during extended use.

What mounting hardware must I already have to attach this head to my tripod?

Your tripod or monopod needs a 3/8-inch screw thread to match the 60 mm base.

Will the 1/4-inch and 3/8-inch top screws hold my older DSLR and telescope together?

Yes, both screw sizes are provided on the sliding plate for cameras or telescopes up to 22 lb.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.