Barrow Mods
Barrow Mods 2 in 1 Accessory CT-167 10 Pin Mini Din to Bare Wires 100cm
Connects Yaesu FTM-100, 200 and 400 series radios via 10-pin mini DIN to bare wires for data transfer
- Compatible with Yaesu FTM-100D/DE/DR and FTM-400D/DE/DR models
- 10-pin mini DIN male connector to bare wire ends for data transfer
- 100 cm cable length using 28 AWG shielded copper conductors
- 0 mm outer diameter PVC jacket for durable construction
- Available in 1.0 m, 1.8 m and 3.0 m lengths with custom options
Compatible radios
The 10-pin mini DIN male connector fits Yaesu FTM-100D, FTM-100DE, FTM-100DR, FTM-200DE, FTM-400D, FTM-400DE and FTM-400DR transceivers. It provides a direct data link for programming or cloning without an intermediate adapter. The bare-wire opposite end lets you terminate the cable to suit your interface hardware.
Replaces proprietary leads
This cable substitutes the factory Yaesu CT-167 lead when the original is lost or damaged. The 28AWG, nine-conductor shielded construction matches the OEM specification for reliable serial communication. Choose the 100cm, 180cm or 300cm length to match the installation distance and avoid excess slack. Custom lengths are available for non-standard runs.
Build integration
The PVC jacket and 5.0mm overall diameter route cleanly through vehicle trim or desktop cable management. Bare copper conductors accept solder, crimp terminals or screw terminals for connection to USB serial adapters, TNCs or custom interfaces. No driver is required beyond the host software that talks to the radio. Shielding helps reject vehicle electrical noise during mobile operation.
Highlights
- Compatible with Yaesu FTM-100D/DE/DR and FTM-400D/DE/DR models
- 10-pin mini DIN male connector to bare wire ends for data transfer
- 100 cm cable length using 28 AWG shielded copper conductors
- 0 mm outer diameter PVC jacket for durable construction
- Available in 1.0 m, 1.8 m and 3.0 m lengths with custom options
Specifications
No published specifications for this item yet.
Questions about this item
What connector does the CT-167 use to mate with the radio?
The cable terminates in a 10-pin mini DIN male plug that fits the Yaesu FTM-100D, FTM-200DE and FTM-400D series data ports.
How do I attach the bare-wire ends for data projects?
Strip the 28AWG conductors, solder or crimp them to your DB-9, USB adapter or custom header, and verify the shield connection before powering the radio.
When should I consider replacing this cable?
Replace it if the PVC jacket cracks, the shield braid frays near the mini DIN housing, or the bare copper wires show corrosion after repeated flexing.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
