We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two white rectangular outdoor wireless bridges with integrated directional antennas and pole mounts

Barrow Mods

Barrow Mods 2 in 1 accessory CPE450 5.8G 450 48V POE 2pcs

SKU CH-KVJX-RYSZK

A pre-paired 5.8 GHz wireless bridge kit with 14 dBi MIMO antennas and 48 V PoE power for links up to 300 Mbps

  • Pre-configured link works out of the box
  • 300 Mbps wireless throughput between the two units
  • 14 dBi MIMO antenna reaches up to 3 km
  • 48 V PoE powers both bridges over Ethernet
  • Two 10/100 Mbps ports give wired speeds up to 100 Mbps

Outdoor Wireless Bridge Kit

The Barrow Mods 2 in 1 accessory CPE450 is a pre-paired point-to-point wireless bridge kit designed to extend a network link between two fixed locations. It suits installers who need a ready-to-use 5.8G connection for remote buildings, cameras or Starlink redistribution without complex configuration. The two-unit package arrives factory paired so the link is active once both ends are powered and mounted.

Pole-Mount Enclosure with Dual RJ45

Each unit integrates a 14dBi MIMO antenna inside a weather-rated housing built for outdoor pole mounting. Two 10/100Mbps RJ45 ports per device accept a single Ethernet cable that carries both data and 48V POE power, removing the need for a separate power supply at the antenna site. The dial pairing method and matching A-B button let you confirm master and slave roles on site without a laptop.

Passive Cooling and Low Power Draw

The sealed enclosure relies on passive convection so operation is silent and there are no moving parts to fail in dust or rain. Power comes entirely from the 48V POE injectors supplied with the kit, keeping cabling simple and consumption modest. With a 300Mbps wireless link rate and 100Mbps wired throughput the bridge handles typical surveillance and broadband extension loads without thermal throttling.

Highlights

  • Pre-configured link works out of the box
  • 300 Mbps wireless throughput between the two units
  • 14 dBi MIMO antenna reaches up to 3 km
  • 48 V PoE powers both bridges over Ethernet
  • Two 10/100 Mbps ports give wired speeds up to 100 Mbps

Specifications

No published specifications for this item yet.

Questions about this item

What wireless frequency does the CPE450 operate on?

The CPE450 operates on the 5.8G frequency band for point-to-point links.

What mounting hardware is included for outdoor installation?

The kit includes a pole-mount bracket and hardware to secure each unit to a mast or wall.

How are the master and slave units paired during setup?

Set both units to the same number using the A-B dial, then press the RST button on each to complete pairing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.