Barrow Mods
Barrow Mods 2 in 1 accessory 3.6mm 1080P IR dome camera
A 1080p USB dome camera with infrared night vision and a waterproof aluminium housing for indoor or outdoor monitoring
- 1080P full-HD clarity from a 2.0-megapixel OV2710 sensor
- Smooth 120 fps capture at 640 x 480 for fast motion
- Infrared LEDs on a 3.6 mm lens enable day-and-night vision
- Mini aluminium dome housing is waterproof for outdoor mounting
- USB 2.0 interface delivers MJPEG or YUY2 video without extra drivers
Compact USB dome camera
The Barrow Mods accessory is a 2.0 megapixel USB camera with a 3.6 mm lens and IR LEDs for day and night vision. It delivers 1080p resolution at 30 fps, 720p at 60 fps, and 480p at 120 fps using MJPEG or YUY2 formats over USB 2.0. The mini aluminium dome housing is waterproof for outdoor mounting.
Indoor or sheltered outdoor monitoring
Suits users who need a small, rugged USB webcam for fixed-position surveillance or video capture where infrared illumination is required. The dome form factor and waterproof case fit discreet installations. Buyers who need wireless connectivity, battery operation, onboard recording, pan-tilt-zoom control, or higher than 1080p resolution should look elsewhere.
Resolution and frame-rate headroom
The sensor comfortably handles 1920 x 1080 at 30 fps for standard monitoring, with 1280 x 720 at 60 fps and 640 x 480 at 120 fps available for smoother motion capture. USB 2.0 bandwidth and the fixed 3.6 mm lens limit maximum resolution and field-of-view flexibility, so very wide-area coverage or multi-megapixel detail are not supported.
Highlights
- 1080P full-HD clarity from a 2.0-megapixel OV2710 sensor
- Smooth 120 fps capture at 640 x 480 for fast motion
- Infrared LEDs on a 3.6 mm lens enable day-and-night vision
- Mini aluminium dome housing is waterproof for outdoor mounting
- USB 2.0 interface delivers MJPEG or YUY2 video without extra drivers
Specifications
No published specifications for this item yet.
Questions about this item
What type of USB port does my computer need for this camera to operate?
The camera uses a USB 2.0 High-Speed or Full-Speed interface, so any standard USB Type-A port will provide the necessary connection and power.
Will the 3.6mm lens and infrared LEDs work effectively with my existing indoor lighting at night?
The 3.6mm lens combined with built-in IR LEDs provides day and night vision, automatically switching to infrared illumination in low-light conditions for clear footage.
How can I verify the camera is capturing at the advertised 1080p resolution after installation?
Open your operating system's camera settings or recording software and confirm the active video resolution is set to 1920x1080 at 30 frames per second.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



