Barrow Mods
Barrow Mods 2 in 1 accessory 12 fiber 900um SC/APC Corning SMF-28 9/125 OS1/OS2
A 2-pack of one-metre, 12-fibre SC/APC pigtails using Corning SMF-28 Ultra single-mode 9/125 µm fibre with ceramic ferrules for low insertion loss and high return loss
- Low insertion loss with APC polish at 0.3 dB
- High return loss of 65 dB for clean signal reflection
- Corning SMF-28 Ultra fibre meets ITU-T G.652D and exceeds G.657.A1 bend standard
- 12 colour-coded 900 µm tight-buffer fibres for easy identification
- Riser-rated OFNR jacket operates from -20 °C to +70 °C
SC/APC pigtail kit for single-mode deployments
This two-metre bundle contains twelve 900 µm tight-buffer fibres terminated with SC/APC ceramic ferrules. Each strand is built on Corning SMF-28 Ultra glass that meets ITU-T G.652D and exceeds G.657.A1 bend requirements. The pigtails suit regional, metro, access and FTTH networks where low loss and full-spectrum operation matter.
Colour-coded riser jacket with ceramic ferrules
Twelve distinct jacket colours let technicians identify channels at a glance during splicing or patch-panel work. The OFNR-rated PVC jacket is riser-listed for vertical runs and remains flexible in tight trays. Ceramic ferrules deliver precise coaxiality, yielding insertion loss of .3 dB and return loss of 65 dB per connector.
Tested terminations and broad compliance
Every connector is factory tested before shipment, so installers can deploy immediately without field verification. The assembly carries ITU, UL, CE, IEC, TIA and RoHS marks, covering safety and environmental mandates across jurisdictions. Operating temperature spans -20 °C to +70 °C, and attenuation stays at .32 dB/km at 1310 nm and .18 dB/km at 1550 nm.
Highlights
- Low insertion loss with APC polish at 0.3 dB
- High return loss of 65 dB for clean signal reflection
- Corning SMF-28 Ultra fibre meets ITU-T G.652D and exceeds G.657.A1 bend standard
- 12 colour-coded 900 µm tight-buffer fibres for easy identification
- Riser-rated OFNR jacket operates from -20 °C to +70 °C
Specifications
No published specifications for this item yet.
Questions about this item
What is the return loss for the SC/APC connectors on this 12-fiber pigtail?
The SC/APC connectors have a return loss of 65 dB, while UPC variants measure 50 dB.
What cable jacket diameter and rating does this 900um tight-buffer fiber use?
It uses a 900 µm Riser OFNR PVC jacket, lightweight and flexible for indoor routing.
How are the 12 fibers identified during installation to avoid crossing channels?
Each fiber is color-coded, allowing quick visual identification of individual channels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
