We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Barrow Mods 14-pin to 7-pin D-Tap Y cable, 90 cm total length, black finish

Barrow Mods

Barrow Mods 14 pin to 7 pin D-Tap Y Cable 90CM 2 in 1 accessory

SKU CH-D27Z-ZJ7BF

Splits a 14-pin Preston Micro Force connection to a 7-pin DM5 motor and a D-Tap power tap with 45 cm main and splitter cables totalling 90 cm

  • Powers Preston Micro Force and DM motors simultaneously via 14-pin, 7-pin and D-Tap connectors
  • 90 cm total length with 45 cm main and 45 cm splitter sections for flexible rigging
  • Tested free of short circuits and potential breakdowns before shipment
  • Compatible with Preston DM1, DM-1X, DM-2, DM4X and DM5 lens motors
  • 2-in-1 Y-cable design reduces cable clutter on camera builds

Preston Micro Force power cable

This 14-pin to 7-pin D-Tap Y cable delivers power and control signals to Preston Micro Force Digital 3 and DM-series motors. The 90 cm assembly splits into a 45 cm main lead and a 45 cm splitter for flexible routing. It suits camera operators and technicians integrating Preston motors with Anton-Bauer power systems.

Check connector compatibility first

Verify that your Preston Micro Force Digital 3 uses a 14-pin FGG input and that the motor requires a 7-pin FHG connection. Confirm the D-Tap source matches your Anton-Bauer or compatible power tap. Cable length is fixed at 90 cm, so measure the run between controller, motor and battery before ordering.

Tested Y-cable with mixed connectors

Each unit is tested for short circuits and potential breakdown before shipping. The moulded 14-pin plug, 7-pin elbow plug and D-Tap branch lock securely, reducing accidental disconnects on set. The 45 cm split keeps the D-Tap near the battery while the motor lead reaches the lens.

Highlights

  • Powers Preston Micro Force and DM motors simultaneously via 14-pin, 7-pin and D-Tap connectors
  • 90 cm total length with 45 cm main and 45 cm splitter sections for flexible rigging
  • Tested free of short circuits and potential breakdowns before shipment
  • Compatible with Preston DM1, DM-1X, DM-2, DM4X and DM5 lens motors
  • 2-in-1 Y-cable design reduces cable clutter on camera builds

Specifications

No published specifications for this item yet.

Questions about this item

What connectors are included on the cable and what does each one connect to?

The cable has a 14 pin male connector for the Preston Micro Force digital 3, a 7 pin connector for the DM5 Preston motor, and a D-Tap plug for an Anton-Bauer power tap.

How do I choose between the listed cable lengths?

The total length is 90 cm, split into a 45 cm main cable and a 45 cm splitter cable; other lengths are available on request.

What does the 90 cm total length mean when the cable is installed in a rig?

The 90 cm total comprises a 45 cm main run and a 45 cm splitter, giving you that reach from the Micro Force to the motor and power tap.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.