Barrow Mods
Barrow Mods 12V 2 Pin Right Angle Power Cable 60cm
A 60 cm 12 V power cable with right-angle Lemo 2-pin connectors for ARRI, RED, Z CAM and compatible monitors
- Delivers 12 V power to monitors and transmitters
- 60 cm length suits on-camera rigs
- Right-angle Lemo plug reduces strain on ports
- Flexible lightweight wire eases cable routing
- Compatible with ARRI Alexa and RED DSMC2 cameras
Compatible devices
This 12 V cable connects SmallHD 503 and 703 monitors, Cine7 displays, Teradek Bond Cube and Bolt units, Transvideo StarliteHD and StarliteHD+ monitors, and Preston Light Ranger2 MDR3 and MDR4 accessories. It draws power from ARRI Alexa, RED DSMC2 and Z CAM E2 F6 S6 camera ports. The cable suits any device using a 2-pin connection that accepts 7-24 V input.
Length and headroom
At 60 cm the cable reaches from camera body to monitor or transmitter without excess slack. The flexible soft wire routes easily around rigs and gimbals. The 12 V supply works across the 7-24 V range accepted by the listed accessories. It does not serve devices that require a different voltage or a connector style other than Lemo 0B 2-pin.
Connector benefit
Rotating right-angle male to straight male Lemo 0B 2-pin ends let the plug sit flush against the camera port, reducing strain and snag risk during handheld or gimbal work. The lightweight construction adds minimal mass to the rig. No additional adapters or software are included.
Highlights
- Delivers 12 V power to monitors and transmitters
- 60 cm length suits on-camera rigs
- Right-angle Lemo plug reduces strain on ports
- Flexible lightweight wire eases cable routing
- Compatible with ARRI Alexa and RED DSMC2 cameras
Specifications
No published specifications for this item yet.
Questions about this item
Will the 12 V 2-pin right-angle cable work with my older SmallHD 503 monitor?
Yes — the cable is listed for SmallHD 503 and 703 monitors that accept a 2-pin 7-24 V input.
How can I verify the cable is delivering power correctly after connecting it to my ARRI Alexa 12 V port?
The attached monitor or transmitter should power on normally; no separate indicator is built into the cable itself.
Does the 60 cm cable ship with any adapters or must I buy a Lemo 0B 2-pin mate separately?
The cable has a rotating right-angle Lemo 0B 2-pin male on one end and a straight Lemo 0B 2-pin male on the other; no extra adapters are included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



