We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Barco R9842020 projector lamp module with 200W bulb in housing

Barco

Barco R9842020 200W Projector Lamp

SKU CH-GRSP-4V0T5

200 W replacement projector lamp module with 2 000-hour rated life and pre-assembled housing for quick installation

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Ready to install with pre-assembled bulb and housing
  • 200 W UHP lamp delivers specified brightness
  • Rated 2 000 hours of projection time
  • Built to ISO 9001 quality standards
  • Genuine Philips UHP bulb inside the module

Barco R9842020 Replacement Lamp

The Barco R9842020 is a new 200W replacement projector lamp module supplied with a fully assembled Philips UHP bulb and housing. It is designed for owners of compatible Barco projectors who need a drop-in replacement that requires no additional assembly before installation. Each unit is manufactured to ISO 9001 quality standards and undergoes checks for beam performance, ignition, voltage and run-time.

Suits and Limits

This lamp suits technicians and integrators maintaining Barco projectors that specify the R9842020 part number and a 200W UHP light source. It is not for users whose projectors require a different wattage, a different bulb technology or a bare bulb without the housing. Buyers needing a longer rated life than 2,000 hours or a lower-power module should look at other part numbers.

Deciding Specification

The rated lamp life of 2,000 hours is the single figure that determines whether this module matches the maintenance schedule and operating budget for the installation. Verify the projector manual calls for a 200W UHP lamp rated at 2,000 hours before ordering.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 200 W UHP lamp delivers specified brightness
  • Rated 2 000 hours of projection time
  • Built to ISO 9001 quality standards
  • Genuine Philips UHP bulb inside the module

Specifications

BrandBarco
TypeProjector Lamp
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

Which Barco projector models accept the R9842020 200W lamp module?

The R9842020 is designed as a direct replacement for Barco projectors that originally shipped with this 200W UHP lamp assembly; check your projector's service manual for the exact part number match.

Will the 2,000-hour rated life match the original lamp in my older Barco unit?

Yes, the 2,000-hour rating aligns with the original factory specification, so brightness decay and replacement intervals remain consistent with the lamp you are replacing.

How can I verify the new lamp is operating correctly after installation?

Reset the projector's lamp-hour counter, then confirm the on-screen timer starts at zero and the image reaches full brightness without flicker or error messages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.