Barco
Barco OV-515 Projector Lamp 200W 2000 Hrs
A 200W UHP replacement lamp module rated for 2,000 hours, supplied as a fully assembled bulb and housing for straightforward installation in compatible Barco projectors
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled housing
- Bright 200W UHP bulb powers the image
- Rated 2000 hours of projection time
- Exact match for Barco model R9842020
- Built to ISO9001 quality standards
Replacement Lamp for Barco Projectors
The Barco OV-515 is a new 200W projector lamp module supplied as a fully assembled bulb and housing. It is designed for technicians and venue operators who need a direct replacement for the original R9842020 part without additional assembly.
200W UHP Lamp Thermal Profile
The lamp uses a 200W UHP bulb rated for 2000 hours of operation. Power draw remains at the specified wattage during normal projection cycles, and the module is built to meet the thermal requirements of the host projector chassis.
ISO9001 Manufacturing and Compatibility
Each unit is produced under ISO9001 quality controls covering beam performance, ignition voltage, connections and run-time. Four supply versions are offered, including OEM modules from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita and a compatible alternative using genuine OEM parts.
Highlights
- Ready to install with pre-assembled housing
- Bright 200W UHP bulb powers the image
- Rated 2000 hours of projection time
- Exact match for Barco model R9842020
- Built to ISO9001 quality standards
Specifications
| Brand | Barco |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the OV-515 lamp module and what step is often missed?
The module arrives fully assembled with bulb and housing; insert it into the projector's lamp compartment and secure the retaining screws, then reset the lamp-hour counter in the projector menu so the new 2,000-hour rating is tracked correctly.
What maintenance or replacement will the lamp need after the rated hours?
The UHP 200W bulb is rated for 2,000 hours of operation; once that limit is reached the entire lamp module must be replaced because the housing is not designed for bulb-only swaps.
What is the first limitation that appears during sustained use?
The 2,000-hour lamp-life rating is the primary limit; as the bulb ages, brightness gradually declines and ignition voltage rises until the projector can no longer strike the lamp reliably.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



