We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Barco OV-1015 projector lamp module with housing

Barco

Barco OV-1015 R9842020 200W Projector Lamp

SKU CH-C3EG-4BRJJ

A 200W replacement projector lamp with a 2,000-hour rated life, supplied as a pre-assembled module for quick installation

  • TypeProjector Lamp
  • Wattage200W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module saves setup time
  • 200 W UHP bulb delivers specified brightness
  • 2,000-hour rated life reduces replacement frequency
  • Manufactured to ISO 9001 quality standards
  • Compatible with Barco R9842020 projector models

Ready-to-install 200 W projector lamp

The Barco OV-1015 R9842020 is a complete lamp module that pairs a new Philips UHP 200 W bulb with its housing. It arrives fully assembled for immediate installation in compatible Barco projectors. The unit is rated for 2,000 hours of operation.

Replaces the original lamp module

This module replaces a depleted or dimming factory lamp without requiring separate bulb handling. The upgrade is worthwhile when image brightness has fallen below usable levels or the projector signals end-of-life. It restores factory-spec output rather than increasing it.

Limits of UHP 200 W technology

The 200 W UHP design caps maximum brightness and colour stability at the rated 2,000-hour lifespan. Beyond that point, lumen output drops and colour shift accelerates. The module does not support higher-wattage bulbs or alternative lamp technologies.

Highlights

  • Ready-to-install module saves setup time
  • 200 W UHP bulb delivers specified brightness
  • 2,000-hour rated life reduces replacement frequency
  • Manufactured to ISO 9001 quality standards
  • Compatible with Barco R9842020 projector models

Specifications

BrandBarco
TypeProjector Lamp
Wattage200W
Lamp Life2,000 Hrs.

Questions about this item

What projector models accept the OV-1015 lamp module with part number R9842020?

The OV-1015 lamp module with part number R9842020 is designed as a direct replacement for Barco projectors that specify this lamp model; verify your projector’s service manual lists R9842020 before fitting.

What is the correct sequence for installing the pre-assembled OV-1015 housing, and which step is most often missed?

Power off the projector, allow cooling, remove the lamp cover, release the retaining screws, slide the complete OV-1015 housing in until the connector seats, re-tighten the screws, replace the cover, then reset the lamp-hour counter in the menu — the counter reset is the step most often missed.

When should the 200 W UHP bulb inside the OV-1015 be replaced based on its rated life?

The lamp is rated for 2,000 hours of operation; plan replacement when the projector’s hour counter approaches that figure or when brightness drops noticeably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.