We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Barco MP G15 projector lamp module with 250W Philips UHP bulb in housing

Barco

Barco MP G15 OEM Replacement Projector Lamp 250W

SKU CH-B14H-G1PJM

250 W OEM replacement lamp module with Philips UHP bulb and housing, rated for 2,000 hours

  • TypeProjector Lamp
  • Wattage250W
  • Lamp Life2,000 Hrs.
  • OEM Philips UHP bulb ensures reliable ignition
  • 250W power matches original projector specification
  • 2,000-hour rated life reduces replacement frequency
  • Pre-assembled housing allows quick tool-free installation
  • ISO 9001 manufacturing standards back consistent quality

Barco MP G15 250W projector lamp

The Barco MP G15 is a 250 watt UHP replacement lamp module designed for Barco projectors. It arrives as a fully assembled bulb and housing, ready for immediate use. The lamp is rated for 2,000 hours of operation. It suits venues and installers needing a direct-fit light source.

Installation and common issues

The pre-assembled housing allows straightforward insertion without handling the bare bulb. Alignment pins and connectors match the projector socket, reducing the chance of mis-seating. The most frequent problem is forgetting to reset the projector lamp-hour counter after fitting the new module. Dust on the lens or air filter can also shorten the achieved runtime.

Practical limits of the UHP interface

UHP lamps deliver high brightness but generate significant heat, so adequate projector ventilation is essential for reaching the rated 2,000 hours. Output gradually declines over the lamp life rather than remaining constant. The 250 watt power draw fixes the light output level; it cannot be dimmed below the projector's minimum setting. Frequent on-off cycling reduces total hours more than continuous operation.

Highlights

  • OEM Philips UHP bulb ensures reliable ignition
  • 250W power matches original projector specification
  • 2,000-hour rated life reduces replacement frequency
  • Pre-assembled housing allows quick tool-free installation
  • ISO 9001 manufacturing standards back consistent quality

Specifications

BrandBarco
TypeProjector Lamp
Wattage250W
Lamp Life2,000 Hrs.

Questions about this item

How do I confirm the Barco MP G15 lamp is operating correctly after installation?

Check that the projector powers on without error messages, the image is bright and stable, and the lamp-hour counter begins counting from zero; the module is rated for 2,000 Hrs of use.

What components are included with the Barco MP G15 replacement lamp and is anything else required?

The module arrives as a fully assembled 250W Philips UHP bulb inside its housing, ready to install; no extra parts or tools are needed for the swap.

Which version of the Barco MP G15 lamp should I choose among the OEM and compatible options?

All four versions — direct-from-Philips OEM, Barco-sold OEM, alternative OEM bulb, and third-party compatible — are built to ISO9001 standards and tested for beam performance, ignition, voltage and run-time, so select based on budget and brand preference.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.