We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
New Barco IQ R200L projector lamp module with 120W UHP bulb in housing

Barco

Barco IQ R200L 120W 4000 Hrs Projector Lamp

SKU CH-QXF5-AB8Z8

New 120 W UHP replacement lamp module rated for 4 000 hours, supplied with housing for direct installation

  • TypeUHP
  • Wattage120W
  • Lamp Life4,000 Hrs.
  • Ready to install with pre-assembled bulb and housing
  • 120W UHP lamp delivers 4000 hours of operation
  • Manufactured to ISO 9001 quality standards
  • OEM replacement matches Barco model R9841771
  • Compatible version available using genuine OEM parts

Ready-to-install UHP lamp module

The Barco IQ R200L is a new 120W UHP projector lamp supplied as a complete bulb-and-housing assembly for immediate replacement in compatible Barco projectors. It restores factory brightness without the need for separate bulb handling or alignment. The module is manufactured to ISO9001 quality standards and tested for ignition, voltage, beam performance and run-time before shipment. Buyers who need a bare bulb without the housing cannot use this module.

Direct OEM replacement for R9841771

This lamp replaces the original Barco part number R9841771 and is available in three OEM variants sourced from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita, plus an economical compatible version built with genuine OEM components. The jump is worth it when the existing lamp reaches its rated 4000-hour life or shows dimming, colour shift or ignition failure. Installations that require a different wattage or connector layout are not served by this module.

120W UHP rating and 4000-hour service life

The lamp operates at a fixed 120W power draw and is rated for 4000 hours of typical use before brightness drops to half its initial output. Projectors that demand a higher or lower wattage lamp, or that use a different lamp technology, cannot accept this module. Environments that exceed the rated duty cycle or that lack proper ventilation will shorten the achievable life below the rated figure.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 120W UHP lamp delivers 4000 hours of operation
  • Manufactured to ISO 9001 quality standards
  • OEM replacement matches Barco model R9841771
  • Compatible version available using genuine OEM parts

Specifications

BrandBarco
TypeUHP
Wattage120W
Lamp Life4,000 Hrs.

Questions about this item

Will the R9841771 lamp module fit my Barco projector without extra brackets?

The IQ R200L lamp is a complete bulb-and-housing assembly built to match the original R9841771 form factor, so it seats directly in the projector's lamp compartment.

What is the installation step people most often miss with this 120W UHP module?

After sliding the module in, the retaining screw must be tightened and the lamp-hour counter reset through the projector menu, otherwise the unit will still show the old 4000-hour warning.

When should I plan to replace the lamp again after installing this new unit?

The lamp is rated for 4000 hours of typical use; once the projector's timer reaches that figure the brightness will drop noticeably and a fresh module will be needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.