Barco
Barco iQ Praxis G300 (Single) OEM Philips 200W projector lamp
Replacement lamp module with a 200 W Philips UHP bulb and housing, rated for 2,000 hours
- TypeProjector Lamp
- Wattage200W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- OEM Philips UHP 200W bulb for reliable brightness
- 2,000 hours rated lamp life reduces replacements
- Manufactured to ISO 9001 quality standards
- Compatible with Barco iQ Praxis G300 projectors
Direct-fit replacement lamp
The Barco iQ Praxis G300 module ships as a complete housing with a new Philips UHP 200W bulb inside. It is built for owners of compatible Barco projectors who need a ready-to-install light source without separate bulb handling. The unit matches the original R9841111 specification so the projector recognises it immediately.
Drops into the existing housing
No extra tools or adapters are required; the assembly slides into the projector’s lamp bay and locks in place. Because the bulb comes pre-aligned in its cage, installation time is short and there is no need to touch fragile glass surfaces. The module draws the same 200W the projector expects, leaving the cooling and power systems unchanged.
Rated for 2,000 hours of use
Under continuous operation the lamp maintains stable output until it reaches the rated 2,000-hour service life. ISO 9001 manufacturing checks verify ignition reliability, voltage consistency and beam performance across the full runtime. It is not suited for users who need significantly longer intervals between replacements.
Highlights
- Ready to install with pre-assembled bulb and housing
- OEM Philips UHP 200W bulb for reliable brightness
- 2,000 hours rated lamp life reduces replacements
- Manufactured to ISO 9001 quality standards
- Compatible with Barco iQ Praxis G300 projectors
Specifications
| Brand | Barco |
|---|---|
| Type | Projector Lamp |
| Wattage | 200W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How many hours until the 200W Philips UHP lamp reaches its rated end of life?
The lamp is rated for 2,000 hours of operation before replacement is recommended.
What thermal or acoustic load should I expect when the module runs continuously?
The 200W UHP bulb generates significant heat; the projector’s built-in cooling system manages temperature and fan noise during extended use.
Which Barco projector models accept the R9841111 lamp module?
This module is designed for the Barco iQ Praxis G300 projector.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



