Barco
Barco iQ G350 PRO (Dual) R9841760 250W projector lamp
A 250 W projector lamp module with a 2,000-hour rated life, supplied as a complete housing for direct installation
- TypeProjector Lamp
- Wattage250W
- Lamp Life2,000 Hrs.
- Ready-to-install module with 250 W Philips UHP bulb
- 2,000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
- Compatible with Barco iQ G350 PRO (Dual) projectors
Replacement lamp for Barco iQ G350 PRO (Dual)
This 250W projector lamp module is built for the Barco iQ G350 PRO (Dual) system. It arrives as a fully assembled bulb and housing so installation is straightforward. The unit uses a Philips UHP bulb and is manufactured to ISO 9001 quality standards. It suits technicians and venues needing a direct OEM-spec replacement.
Thermal behaviour and power draw
The lamp operates at 250W and is rated for 2,000 hours of service life. Normal projection use keeps the bulb within its designed thermal envelope without extra cooling demands. Power consumption stays at the rated wattage during standard operation. No additional noise sources are introduced beyond the projector's own fans.
Sustained load performance
Under continuous operation the lamp maintains stable output for the rated 2,000-hour lifespan. Ignition voltage and beam performance are validated through strict quality checks before shipment. The module is designed to run for extended sessions without degradation beyond the specified life rating. It is not intended for users who require a longer-rated light source or a different wattage configuration.
Highlights
- Ready-to-install module with 250 W Philips UHP bulb
- 2,000-hour rated lamp life for extended use
- Manufactured to ISO 9001 quality standards
- Genuine OEM bulb from Philips, Osram, Ushio, Phoenix, Iwasaki or Matsushita
- Compatible with Barco iQ G350 PRO (Dual) projectors
Specifications
| Brand | Barco |
|---|---|
| Type | Projector Lamp |
| Wattage | 250W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the iQ G350 PRO (Dual) lamp module R9841760, and what step is often missed?
The module arrives as a fully assembled 250 W bulb and housing; insert it into the projector, then reset the lamp-hour counter in the menu — skipping the reset is the common error.
What maintenance or replacement will the Barco 250 W UHP lamp need later?
After roughly 2,000 hours of use the lamp reaches its rated life; replace the complete module with a new R9841760 unit to restore brightness and reliability.
What limit appears first during sustained operation of the 250 W projector lamp?
The 2,000-hour rated lamp life is the primary limit; brightness and ignition stability decline as that threshold is approached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



