We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Barco iQ G300 projector lamp module with housing

Barco

Barco iQ G300 Projector Lamp 250W 2000 Hrs

SKU CH-M943-8X2G4

250W replacement lamp module with pre-assembled housing installs directly in Barco iQ G300 projectors and delivers 2000 hours of operation

  • TypeProjector Lamp
  • Wattage250W
  • Lamp Life2,000 Hrs.
  • Ready to install with pre-assembled bulb and housing
  • 250W UHP lamp delivers consistent brightness
  • 2,000 hours rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time

Direct replacement for Barco iQ G300

This projector lamp module delivers a genuine Philips UHP 250W bulb pre-mounted in its housing. It matches the original Barco part number R9841100 so installation is straightforward for technicians and AV teams maintaining iQ G300 units. The lamp is rated for 2,000 hours of operation. Buyers needing a different wattage or a bare bulb without housing should look elsewhere.

Thermal output and power draw

The 250W UHP lamp runs at its specified wattage during normal projection, producing the heat and light output the projector’s cooling system was designed for. Acoustic performance follows the host projector’s fan profile; the module itself adds no moving parts. No external ballast or power adjustment is required beyond the projector’s standard supply.

Build quality and daily handling

Each unit is assembled to ISO9001 quality standards and tested for beam performance, ignition voltage, connections and run-time before shipment. The complete housing eliminates alignment steps, reducing downtime during lamp changes. Connectors match the OEM layout so the module seats securely without adapters. The lamp is not user-serviceable beyond whole-unit replacement.

Highlights

  • Ready to install with pre-assembled bulb and housing
  • 250W UHP lamp delivers consistent brightness
  • 2,000 hours rated lamp life for extended use
  • Manufactured to ISO 9001 quality standards
  • Tested for beam performance, ignition and run-time

Specifications

BrandBarco
TypeProjector Lamp
Wattage250W
Lamp Life2,000 Hrs.

Questions about this item

How do I install the Barco iQ G300 lamp module R9841100 and what step is often missed?

The module arrives as a fully assembled 250 W bulb in its housing; slide it into the projector until the connector seats firmly, then reset the lamp-hour counter in the menu — skipping the reset is the step most people forget.

What maintenance or replacement will the Barco iQ G300 lamp need later?

The 250 W UHP bulb is rated for 2,000 hours; once that runtime is reached the whole module must be replaced, as the housing is not designed for bulb-only swaps.

What limit appears first during sustained use of the Barco iQ G300 250 W lamp?

The 2,000-hour rated lamp life is the primary limit; after those hours brightness drops and ignition reliability falls, so the module should be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.