Banner
Banner T30UXUA ultrasonic sensor 100-1000 mm 12-30 V dc 0-10 V analog electrician tool
Ultrasonic proximity sensor measuring 100 to 1000 mm with 0-10 V analog output on a 2 m cable, powered by 12-30 V dc
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Detects objects from 100 mm to 1 m
- Temperature compensation maintains 0.02% accuracy per °C
- Teach-button setup requires no PC configuration
- 2 m cable with 4-pin connection simplifies wiring
- Withstands 30G shock and 10G vibration per MIL-STD-202F
Ultrasonic sensor 100-1000 mm
The Banner T30UXUA is an ultrasonic proximity sensor designed for electricians and automation technicians who need non-contact distance measurement. It detects targets from 100 mm to 1000 mm using a time-of-flight sensing beam. The barrel housing is made from PBT material and includes LED indicators for status feedback. A 2 m cable provides the connection.
12-30 V dc analog output limits
The sensor operates on a 12 to 30 V dc power supply with a 500 ms delay at power-up. It delivers a 0 to 10 V dc analog output configured for a minimum 2.5 k? load impedance. Analog resolution is 0.1% of distance with a 0.5 mm minimum repeatability. Temperature effect is rated at 0.02% of sensing distance per degree Celsius. Discrete outputs are protected against short circuits and rated at 100 mA maximum.
PBT barrel with teach button
The red PBT barrel housing meets vibration requirements per MIL-STD-202F Method 201A and mechanical shock standards per IEC 60947-5-2 at 30G for 11 ms. A teach button on the housing allows setup without a PC. The 4-pin cable connection has no quick-disconnect option, so the 2 m cable must be routed and terminated directly. NPN saturation voltage stays below 1.6 V and PNP below 3 V at 100 mA.
Highlights
- Detects objects from 100 mm to 1 m
- Temperature compensation maintains 0.02% accuracy per °C
- Teach-button setup requires no PC configuration
- 2 m cable with 4-pin connection simplifies wiring
- Withstands 30G shock and 10G vibration per MIL-STD-202F
Specifications
| Brand | BANNER |
|---|---|
| Model | T30UXUA |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Should I choose the 100 mm minimum or the 1000 mm maximum range version for my application?
This model covers the full 100 mm to 1000 mm span in one unit, so you do not select a separate version; the teach button lets you set the working window inside that range.
What does the 0.1% analog resolution figure mean when the sensor is installed?
It means the 0-10 V output can resolve changes as small as 0.1% of the measured distance, with a practical floor of 0.5 mm repeatability.
How does the 12-30 V dc supply and 0-10 V output interface limit the cable run?
The 2 m cable is fixed; the 0-10 V output requires a minimum 2.5 kΩ load impedance, and voltage drop over longer wires would degrade the 0.1% resolution.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
